Showing 1–12 of 25 results

Baloon Fixed Flow Regulator

Mainly used for calibration and filling of weather balloons. Balloon regulator has a unique outlet with a flow rate of 15 L/Mn and can be used on cylinders with standard c10 connection.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
15 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
Balloon connection
Material: 
Brass
Warranty: 
1 year

Bump Test Fixed Flow Regulator

Bump test is a functional test of a gas monitor. This regulator is used for calibration and working of Bump test for known quantity gas.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
1/8” BSP or NPT-F
Material: 
Brass
Warranty: 
1 year

C10 DA Valve

The 3/4 x 16 UN C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in stainless steel.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
3/4″ x 16 UN
Outlet Connection: 
5/18″ UNF-F
Material: 
Stainless Steel
Warranty: 
1 year

C10 Valve

The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel. It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
5/18″ UNF-F
Material: 
Brass or stainless steel
Warranty: 
1 year

CGA 165 Valve

This valve is light in weight comes with a ON/OFF knob and a brass CGA 165 outlet connection where a free nut is fitted for coupling.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
1”x14 UNS
Outlet Connection: 
CGA 165
Material: 
Aluminium
Warranty: 
1 year

CGA 600 Valve

The Standard CGA 600 valve is used for 17 Litres and 34 Litres steel cylinders.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
1”x20 UNEF-M
Material: 
Stainless Steel
Warranty: 
1 year

Combination Regulator

Combination Regulator is compatible with standard C10 connection refillable cylinders. The unique design of this regulator allows it to act like a valve and regulator when needed. It consists of ON/OFF knob with pressure gauge to determine the cylinder volume and a gas refiling port on top on of the regulator.
SPECIFICATIONS
Inlet Pressure: 
100 bar
Outlet Flow: 
0.1 to 7 L/Mn
Inlet Connection: 
1/14” UNS
Outlet Connection: 
Barbed Outlet
Material: 
Aluminium
Warranty: 
1 year

Duo Fixed Flow Regulator

The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.   Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn & 1.0 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material: 
Brass
Warranty: 
1 year

Fixed Flow Regulator

Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a C10 connection. It is one of the most common regulators used in the world of gas Calibration and comes with a wide range of flows that are set as per your need. Suitable for Oxygen as all parts are made of Brass and range from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn to 25.0 L/Mn
Inlet Connection: 
C10 ( 5/8″ x 18 UNF -M )
Outlet Connection: 
Barbed connection
Material: 
Brass / Stainless Steel
Warranty: 
1 year

Fixed Flow Regulator NPT

Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a NPT connection.
SPECIFICATIONS
Inlet Pressure: 
200 bar
Outlet Flow: 
0.5 L/Mn & 1.0 L/Mn
Inlet Connection: 
1/4“ NPT F
Outlet Connection: 
Barbed connection
Material: 
Stainless Steel
Warranty: 
1 year

High Pressure Fixed Flow Regulator

It is compatible with all gas cylinders with standard C10 connections and is available in variety outlet flows and can be used with gas mixture in disposable cylinders.
SPECIFICATIONS
Inlet Pressure: 
200 bar
Outlet Flow: 
0.3 to 7 L/Mn at 4 bar pressure
Inlet Connection: 
1/4“ NPT F for the high Pressure
Outlet Connection: 
1/4“ NPT F for the high Pressure
Material: 
Brass & Stainless Steel
Warranty: 
1 year

Hybrid Compression Flow regulator

Hybrid Compression Flow Regulator is manufactured to give various fixed flow rates and compatible for all calibration needs. Made with aluminium and Stainless Steel , this regulator is light and durable can be used with ¼” tubing at inlet. Suitable for low ppm reactive gasses as all parts are made of Stainless Steel and ranges from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn to 25.0 L/Mn
Inlet Connection: 
Compression Fitting for ¼ “ Tubing
Outlet Connection: 
Barbed connection
Material: 
Aluminium and Stainless Steel
Warranty: 
1 year