C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year
Related products
Combination Regulator
Combination Regulator is compatible with standard C10 connection refillable cylinders. The unique design of this regulator allows it to act like a valve and regulator when needed.
It consists of ON/OFF knob with pressure gauge to determine the cylinder volume and a gas refiling port on top on of the regulator.
SPECIFICATIONS
Inlet Pressure:
100 bar
Outlet Flow:
0.1 to 7 L/Mn
Inlet Connection:
1/14” UNS
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
Trigger Fixed Flow Regulator
The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders.
The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
6mm Straight tube
Material:
Brass
Warranty:
1 year
Hybrid Fixed Flow Regulator
The Hybrid type Fixed flow regulator comes with unique design that can be used with disposable cylinders filled with reactive gases.
It comprises of an aluminium cap and stainless-steel body which can be used for corrosive gasses. The aluminium cap contributes to reduction in weight and size of the regulator.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.3 to 7 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection
Material:
Stainless Steel (Body) & Aluminium (Cap)
Warranty:
1 year
Cannister Bag
Micro Demand Flow Regulator
Micro DFR is normally off and can only be operational by negative suction greater than 3“ water column in all gas instruments which have internal pumps.
DFR helps in eliminating the need for flow meters and sample bags.
SPECIFICATIONS
Inlet Pressure:
70 bar or 124 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
CGA 590 15/16” x 14 UN-M or CGA 350 13/16” x 14 UN-F or CGA 600 1” x 20 UNEF or C10 5/8”x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
CGA 600 Valve
Duo Fixed Flow Regulator
The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.
Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material:
Brass
Warranty:
1 year
Baloon Fixed Flow Regulator
Mainly used for calibration and filling of weather balloons.
Balloon regulator has a unique outlet with a flow rate of 15 L/Mn and can be used on cylinders with standard c10 connection.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Balloon connection
Material:
Brass
Warranty:
1 year