Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
Related products
Hybrid Fixed Flow Regulator
The Hybrid type Fixed flow regulator comes with unique design that can be used with disposable cylinders filled with reactive gases.
It comprises of an aluminium cap and stainless-steel body which can be used for corrosive gasses. The aluminium cap contributes to reduction in weight and size of the regulator.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.3 to 7 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection
Material:
Stainless Steel (Body) & Aluminium (Cap)
Warranty:
1 year
Cannister Bag
CGA 165 Valve
Micro Demand Flow Regulator
Micro DFR is normally off and can only be operational by negative suction greater than 3“ water column in all gas instruments which have internal pumps.
DFR helps in eliminating the need for flow meters and sample bags.
SPECIFICATIONS
Inlet Pressure:
70 bar or 124 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
CGA 590 15/16” x 14 UN-M or CGA 350 13/16” x 14 UN-F or CGA 600 1” x 20 UNEF or C10 5/8”x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
Can Puncturing Tool
Rupture Disk C10 Valve
This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder.
The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18” UNF-F
Material:
Stainless Steel
Warranty:
1 year
Hybrid Compression Flow regulator
Hybrid Compression Flow Regulator is manufactured to give various fixed flow rates and compatible for all calibration needs.
Made with aluminium and Stainless Steel , this regulator is light and durable can be used with ¼” tubing at inlet.
Suitable for low ppm reactive gasses as all parts are made of Stainless Steel and ranges from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn to 25.0 L/Mn
Inlet Connection:
Compression Fitting for ¼ “ Tubing
Outlet Connection:
Barbed connection
Material:
Aluminium and Stainless Steel
Warranty:
1 year
C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year