High Pressure Fixed Flow Regulator
It is compatible with all gas cylinders with standard C10 connections and is available in variety outlet flows and can be used with gas mixture in disposable cylinders.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.3 to 7 L/Mn at 4 bar pressure
Inlet Connection:
1/4“ NPT F for the high Pressure
Outlet Connection:
1/4“ NPT F for the high Pressure
Material:
Brass & Stainless Steel
Warranty:
1 year
Related products
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
C10 DA Valve
Push Lever Fixed Flow Regulator
The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass & Stainless Steel
Warranty:
1 year
Pump Flow Valve
Fixed Flow Regulator NPT
Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a NPT connection.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
1/4“ NPT F
Outlet Connection:
Barbed connection
Material:
Stainless Steel
Warranty:
1 year
Duo Fixed Flow Regulator
The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.
Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material:
Brass
Warranty:
1 year
Multi Flow Regulator
Multi Flow regulator is a single stage piston style regulator. The regulator has 9 selectable flow settings. Used with corrosive and non-corrosive gases.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0 to 3 L/Mn, 0 to 5 L/Mn, 0 to 8 L/Mn, 0 to 15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed or Compression fitting
Material:
Brass or Stainless Steel
Warranty:
1 year