Showing 1–12 of 40 results

Solo 100 & 108 – Telescopic Access Poles

An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use. Suitable for use with both Solo and Testifire branded products Required for access to detectors out of normal reach Lightweight non-conductive glass fibre construction Optimum strength to weight ratio ensures minimum possible whip or bend at height Easy to use locking mechanism Available in two lengths: Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Designed for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Solo 101 – Extension Access Pole

The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive. Pole length: 1.13m Can be used: On its own to reach normal ceiling height In conjunction with a Solo telescopic access pole for additional height With Testifire and Solo testing devices Ideal for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Directive Allows for "functional" testing to be carried out Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles Non-conductive glass fibre construction protects engineer from inadvertent shorts

Solo 200 – Universal Detector Removal Tool

With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole

Solo 330 – Smoke Dispenser

The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights

Solo 332 – Large Smoke Dispenser

Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height. Allows "functional" smoke detector testing to be carried out UL listed Robust and lightweight Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery Clear cup ensures 360 degree view of the detector Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not included) Can be used with the Solo telescopic and extension access poles for safe testing at heights Suitable for use when testing domestic smoke and CO alarms

Solo 365 Adaptor for ASD Systems

Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment. No-fuss functional testing of aspirating smoke detection systems Designed for use only with Solo 365 equipment Quick and easy to fit while on the job Small and lightweight – can be kept on hand at all times Controlled smoke delivery for less wastage and more efficient testing Allows testing of both ASD and point detectors with a single, portable device Works with the Solo 365's delayed start and manual purge options Slimline design enables access to awkwardly positioned detectors Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.

Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)

The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out. Designed for use only with Solo 365 equipment Supplied in packs of 3 cartridges Provides on-demand smoke for accurate testing and minimal wastage Non-pressurised for safe storage and transportation Small and lightweight, can easily be carried in pockets Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers Please note: Batch number shown in the images may not be the batch number of the units dispatched.

Solo 365 Field Service Pack

Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order. Designed for use only with Solo 365 equipment Easy to install, field-replaceable design – no service requirement Test more detectors in less time by carrying spares instead of going back to the van The field service pack contains: 1x Cup & Membrane 1x Smoke Generator 1x Lithium Ion Battery Pack Small, lightweight component designs make carrying spares far easier Reduced downtime due to damaged equipment Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.

Solo 365 Replacement Cup and Membrane

The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage. Designed for use only with Solo 365 equipment Quick and easy to swap out while on the job Controlled smoke delivery for less wastage and more efficient testing See-through plastic lets engineers check indicator LEDs on detectors Contains simulated smoke to prevent wastage and increase test efficiency Works with the Solo 365's integrated proximity sensor for automated testing Pivots independently from the head unit to fit over hard-to-reach detectors

Solo 365 Replacement Smoke Generator

This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van

Solo 365 Smoke Detector Tester Head & Key Components Kit

The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time. 15% lighter than the Solo 330 Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles Slimline design enables access to awkwardly positioned detectors Smaller, non-pressurised smoke cartridges for ease of storage and transport Delayed start and manual purge options for ASD and non-standard detector testing Battery, cartridge, and generator status LEDs Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Auto-LED torch for testing in dark areas Test/clear cycle status indicators located at the bottom of the head for clear line of sight Proximity sensor automatically starts test and clear cycles for quicker testing Controlled smoke delivery for less wastage and more efficient testing Automatically turns off after 10 minutes of inactivity to extend battery life Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.

Solo 365 Spare Battery Pack

The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site. Designed for use only with Solo 365 equipment Available individually and in packs of 4 Small, lightweight design makes carrying spares far easier than traditional Solo battery batons High-capacity Lithium Ion technology Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit Test more detectors in less time by carrying spares instead of going back to the van