Showing 13–24 of 40 results

Solo 365 Spare Battery Pack

The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site. Designed for use only with Solo 365 equipment Available individually and in packs of 4 Small, lightweight design makes carrying spares far easier than traditional Solo battery batons High-capacity Lithium Ion technology Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit Test more detectors in less time by carrying spares instead of going back to the van

Solo 365 Universal Charging Kit

The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere. Designed for use with the Solo 365 Battery Pack Works with most USB power sources and a wide range of international power supplies Supplied with transformer block to provide optimum voltage and current Simple click-on plug face design No large "power brick" required, reducing bulk and weight for transportation Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.

Solo 423 & 424 – Mains Powered Heat Detector Testers

The Solo mains powered heat detector testers are designed specifically for checking heat detectors using a genuine and safe heat source. Available in two voltage versions, the mains powered heat detector testers are supplied with a 5m (16ft) cable and are suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C (194 °F). The Solo telescopic poles allow the tester to access heat detectors at height, therefore eliminating the need for ladders or scaffolding. Provides detectors with a genuine and safe heat source Designed in accordance with the Construction Regulations 1996 and the Electricity at Work Regulations 1989 Suitable for the majority of modern heat detectors Can be used on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F Rapid activation times Available in two versions: Solo 423 - 110/120V Solo 424 - 220/240V Lightweight and easy to use Supplied with a 5m/16ft cable as standard Compatible with Solo telescopic poles for testing at height

Solo 425 – Heat Detector Tester 5m Extension Cable

Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height. Cable length: 5m/16ft Designed to help power Solo mains heat detector testers Needed for applications where multiple telescopic or extension poles are used Allows testing of heat detectors mounted at greater height

Solo 460 – Cordless Heat Detector Tester – Head Unit Only

The head unit only of the Solo 461 cordless heat detector tester is ideal for instances where you may have more than one technician working on site, or simply to replace a tester that has come to the end of its life. Using Cross Air Technology where heated air is blown across the cup, the Solo 460 cordless heat detector tester head unit provides rapid detector activation without the need for wiring. Replacement head unit only for the Solo 461 Cordless Heat Detector Tester Kit No wiring required - powered by battery batons (not included) Designed for use on fixed temperature, rate-of-rise and combination detectors to up 90 °C/194 °F (not Sabre) Lightweight and easy to use Test cup design allows clear view of the detector LED Uses Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor Suitable for use at height, low levels and angles Suitable for use in conjunction with Solo telescopic access poles Provides rapid detector activation Please note: this listing is for the tester head unit ONLY. For the full kit including battery batons and charger, please see Solo 461 Cordless Heat Detector Tester Kit.

Solo 461 – Cordless Heat Detector Tester Kit

The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation. Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor UL and ULC listed No trailing cables - fully complies with Health and Safety at Work regulations Battery operated - supplied with two battery batons Provides rapid detector activation Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre) Visual low battery indicator Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter) Quiet fan motor for discreet operation Lightweight and easy to use Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately) Suitable for use at angles 1 year manufacturer's warranty

Solo 610 – Protective Storage Bag

This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site

Solo 727 – Fast Battery Charger

The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes. Designed for recharging Solo 770 battery batons Provides power for Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Offers a rapid charging time of just 90 minutes Supplied with 12V and mains connections Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.

Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton

The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly. Designed for use with the Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Negates the need for power cables, removing a potential trip hazard Supplied singularly New improved 3.0Ah model Rechargeable via the smart fast battery charger (not included) Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site

Solo 811 & 812 – Smoke Detector Test and Removal Kits

Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag. Ensures technicians comply with the Safe Working at Height Regulations 2005 Negates the need for ladders or expensive scaffolding Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo A10 smoke detector tester spray (150ml canister) Solo 610 Protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height) Smoke dispenser is suitable for detectors up to 100mm/4" in diameter Removal tool creates various size combinations for the majority of detectors Non-conductive glass fibre access poles Allows "functional" testing to be carried out

Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains

The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor. Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors Allows "functional" testing to be carried out Enables a working height of 6 metres Kit includes: Solo 4.5m telescopic access pole Solo 200 universal removal tool Solo 330 smoke dispenser Solo 220/240V mains powered heat detector tester Solo A10 smoke detector tester spray (150ml canister) Solo 610 protective carry/storage bag Telescopic pole has a non-conductive glass fibre construction Ensures compliance with the Safe Working at Height Regulations 2005 Single telescopic pole suits all three equipment head tools

Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless

Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely. Eliminates the need for ladders and expensive scaffolding Ensures compliance with the Safe Working at Height Regulations 2005 Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo 461 cordless heat detector test set Solo A10 smoke detector tester spray (150ml canister) Solo 610 protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height) Non-conductive telescopic access and extension poles Suitable for the majority of modern smoke and heat detectors Detectors can be accessed out of normal reach No trailing cables - complies with the Health and Safety at Work regulations Smoke dispenser introduces simulated smoke to the detector Heat detector tester directs hot air into the sensor Allows "functional" testing to be carried out