| Product Code | NC365FISE |
|---|---|
| Alternative Product Codes | SERVICE360-001 |
| Brand | Solo 365 |
| Weight | 0.50kg |
| Product Datasheets | SOLO-365-370-Li-Ion-Battery-MSDS |
Be safe at Vertex Safety
Solo 365 Field Service Pack
Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order.
Designed for use only with Solo 365 equipment
Easy to install, field-replaceable design – no service requirement
Test more detectors in less time by carrying spares instead of going back to the van
The field service pack contains:
1x Cup & Membrane
1x Smoke Generator
1x Lithium Ion Battery Pack
Small, lightweight component designs make carrying spares far easier
Reduced downtime due to damaged equipment
Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
Description
Related products
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner. For testing domestic carbon monoxide detectors Hand-held - no need for specialist dispensing equipment Supplied complete with applicator straw Introduces CO to the detector sensor in a controlled manner Contents: approx. 4 litres Non-flammable, compressed gas Due to the nature of the contents, the aerosol feels very lightweight Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height. Cable length: 5m/16ft Designed to help power Solo mains heat detector testers Needed for applications where multiple telescopic or extension poles are used Allows testing of heat detectors mounted at greater height
Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs
Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required. Allows the access of smoke detectors out of normal reach Non-conductive glass fibre extension and telescopic access poles Smoke dispenser introduces simulated smoke to the detector Pack includes: Solo A10 smoke detector tester (150ml canister) Solo 330 smoke dispenser Telescopic access or extension pole (three lengths available) Three access poles to choose from: Solo 101 - 1.13m extension pole (2.5m working height) Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Suitable for detectors up to 100mm/4" in diameter Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out
Solo 332 – Large Smoke Dispenser
Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height. Allows "functional" smoke detector testing to be carried out UL listed Robust and lightweight Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery Clear cup ensures 360 degree view of the detector Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not included) Can be used with the Solo telescopic and extension access poles for safe testing at heights Suitable for use when testing domestic smoke and CO alarms
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes. Designed for recharging Solo 770 battery batons Provides power for Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Offers a rapid charging time of just 90 minutes Supplied with 12V and mains connections Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
Testifire Replacement Smoke Capsules 3 or 6 Pack
These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit. Designed for Testifire equipment Choice of 3 pack or 6 pack Generates smoke as and when needed Unlike most remote testing equipment, does not use stored pressure canisters Colour coded blue for simple identification Individual capsules weigh just 45g
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive. Pole length: 1.13m Can be used: On its own to reach normal ceiling height In conjunction with a Solo telescopic access pole for additional height With Testifire and Solo testing devices Ideal for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Directive Allows for "functional" testing to be carried out Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles Non-conductive glass fibre construction protects engineer from inadvertent shorts
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector. A choice of 150ml or 250ml canisters Delivers smoke replicated particles to a detector Provides a fast detector activation and clearing time Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser Non-flammable Non-toxic Produced no harmful residue Suitable for all types and makes of smoke detector UL and ULC listed
