Product Code | NCSOLOC6 |
---|---|
Brand | Solo |
Capacity |
Approx. 4 litres |
Dimensions (HxDia) |
150x65mm |
Suitability |
Domestic life safety CO detectors |
Weight | 0.01kg |
Product Datasheets | Solo C3 and C6 MSDS |
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held – no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Description
Related products
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out.
Designed for use only with Solo 365 equipment
Supplied in packs of 3 cartridges
Provides on-demand smoke for accurate testing and minimal wastage
Non-pressurised for safe storage and transportation
Small and lightweight, can easily be carried in pockets
Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers
Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height.
Cable length: 5m/16ft
Designed to help power Solo mains heat detector testers
Needed for applications where multiple telescopic or extension poles are used
Allows testing of heat detectors mounted at greater height
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason.
Designed for use only with Solo 365 equipment
Works with the ES3 Smoke Cartridge
Automatically creates smoke when the Solo 365 cup is over a detector head
On-demand, 5-second smoke cycles prevent wastage and detector contamination
Easy to install, field-replaceable design – no manufacturer service required
Test more detectors in less time by carrying spares instead of going back to the van
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole.
Allows "functional" smoke detector testing to be carried out
Durable construction and lightweight
UL listed
Universal: suitable for detectors up to 100mm/4" in diameter
Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste
Transparent test cup enables clear view of the detector LED while testing
Suitable for use on suspended ceiling tiles
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not supplied)
Used with the Solo telescopic access poles: enables safe testing at heights
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Testifire 9202 9m Smoke/Heat/CO Detector Testing Kit
The Testifire 9202 Smoke/Heat/CO detector tester system offers the longest reach of any remote testing apparatus. By boasting the ability to combine a 4.5 metre telescopic access pole with up to three standard extension poles, this kit allows users to highly customise the reach of the system. This massively improves its potential range compared to the standard version. As stated the kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on even the highest ceilings. Removing the need for extensive scaffolding creates immense time saving benefits for those conducting commercial detector testing. With automated test initiation, bespoke programmable test cycles and the longest reach available, the Testifire 9202 kit offers a versatile and complete system. Purchasing this kit is guaranteed to lead to long term time and cost saving benefits compared to the alternatives. This ultimate kit is completed with a universal detector removal tool and free protective storage/carry bag.
Kit includes:
Testifire 2000 Smoke/Heat/CO detector tester
TS3 smoke capsule
TC3 carbon monoxide capsule
Two solo battery batons
Solo 727 fast charger
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 101-001 fibreglass 1.13m extension pole
Solo universal detector removal tool
Solo protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand for smoke and CO sensors
Solo 100 & 108 – Telescopic Access Poles
An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use.
Suitable for use with both Solo and Testifire branded products
Required for access to detectors out of normal reach
Lightweight non-conductive glass fibre construction
Optimum strength to weight ratio ensures minimum possible whip or bend at height
Easy to use locking mechanism
Available in two lengths:
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Designed for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo 610 – Protective Storage Bag
This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site