Product Code | NC365SMGE |
---|---|
Alternative Product Codes | Solo371-001 |
Brand | Solo 365 |
Weight | 0.50kg |
Product Datasheets | Solo 365 Smoke Generator Instructions |
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason.
Designed for use only with Solo 365 equipment
Works with the ES3 Smoke Cartridge
Automatically creates smoke when the Solo 365 cup is over a detector head
On-demand, 5-second smoke cycles prevent wastage and detector contamination
Easy to install, field-replaceable design – no manufacturer service required
Test more detectors in less time by carrying spares instead of going back to the van
Description
Related products
Solo 200 – Universal Detector Removal Tool
With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole
Solo 908 – 4m Test Kit with Solo 365
The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit.
Slimline design allows easy access to awkwardly positioned detectors
Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres)
Automatic LED torch for testing in dark areas
Compatible with standard Solo poles including the 100 and 101
Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Solo 365 Adaptor for ASD Systems
Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment.
No-fuss functional testing of aspirating smoke detection systems
Designed for use only with Solo 365 equipment
Quick and easy to fit while on the job
Small and lightweight – can be kept on hand at all times
Controlled smoke delivery for less wastage and more efficient testing
Allows testing of both ASD and point detectors with a single, portable device
Works with the Solo 365's delayed start and manual purge options
Slimline design enables access to awkwardly positioned detectors
Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive.
Pole length: 1.13m
Can be used:
On its own to reach normal ceiling height
In conjunction with a Solo telescopic access pole for additional height
With Testifire and Solo testing devices
Ideal for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Directive
Allows for "functional" testing to be carried out
Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles
Non-conductive glass fibre construction protects engineer from inadvertent shorts
Testifire Replacement Smoke Capsules 3 or 6 Pack
These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit.
Designed for Testifire equipment
Choice of 3 pack or 6 pack
Generates smoke as and when needed
Unlike most remote testing equipment, does not use stored pressure canisters
Colour coded blue for simple identification
Individual capsules weigh just 45g
Solo 460 – Cordless Heat Detector Tester – Head Unit Only
The head unit only of the Solo 461 cordless heat detector tester is ideal for instances where you may have more than one technician working on site, or simply to replace a tester that has come to the end of its life. Using Cross Air Technology where heated air is blown across the cup, the Solo 460 cordless heat detector tester head unit provides rapid detector activation without the need for wiring. Replacement head unit only for the Solo 461 Cordless Heat Detector Tester Kit No wiring required - powered by battery batons (not included) Designed for use on fixed temperature, rate-of-rise and combination detectors to up 90 °C/194 °F (not Sabre) Lightweight and easy to use Test cup design allows clear view of the detector LED Uses Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor Suitable for use at height, low levels and angles Suitable for use in conjunction with Solo telescopic access poles Provides rapid detector activation Please note: this listing is for the tester head unit ONLY. For the full kit including battery batons and charger, please see Solo 461 Cordless Heat Detector Tester Kit.
Solo 365 Smoke Detector Tester Head & Key Components Kit
The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time.
15% lighter than the Solo 330
Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles
Slimline design enables access to awkwardly positioned detectors
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Delayed start and manual purge options for ASD and non-standard detector testing
Battery, cartridge, and generator status LEDs
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Auto-LED torch for testing in dark areas
Test/clear cycle status indicators located at the bottom of the head for clear line of sight
Proximity sensor automatically starts test and clear cycles for quicker testing
Controlled smoke delivery for less wastage and more efficient testing
Automatically turns off after 10 minutes of inactivity to extend battery life
Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.