| Product Code | NCSOLOC3 |
|---|---|
| Brand | Solo |
| Available Sizes | 250ml canister |
| Weight | 0.15kg |
| Product Datasheets | Solo Product Datasheet |
Be safe at Vertex Safety
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Description
Related products
Testifire Replacement Smoke Capsules 3 or 6 Pack
These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit. Designed for Testifire equipment Choice of 3 pack or 6 pack Generates smoke as and when needed Unlike most remote testing equipment, does not use stored pressure canisters Colour coded blue for simple identification Individual capsules weigh just 45g
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders. Allows "functional" smoke and CO alarm testing to be carried out Extension access pole enables reach of alarms at normal ceiling height Kit includes Solo 332 Large Smoke Dispenser Solo 101 Extension Access Pole Solo A10 Smoke Detector Tester (150ml) Solo C3 Carbon Monoxide Detector Tester (250ml) Ideal for use by facilities management and maintenance companies Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter Introduces the activating element without flooding the alarms Suitable for most domestic smoke and CO alarms
Solo 365 Spare Battery Pack
The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site. Designed for use only with Solo 365 equipment Available individually and in packs of 4 Small, lightweight design makes carrying spares far easier than traditional Solo battery batons High-capacity Lithium Ion technology Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit Test more detectors in less time by carrying spares instead of going back to the van
Solo 200 – Universal Detector Removal Tool
With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole
Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit
The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage. Enables trained personnel to carry out "functional" testing on devices that are out of reach User friendly programmable interface Capable of testing smoke, heat and carbon monoxide (CO) detectors Also suitable for aspirating smoke detector systems Powered by Solo 770 battery batons (sold separately) Ensures compliance with the Safe Working at Height Regulations 2005 Does not require stored pressure cylinders - smoke and CO generated as needed from capsules Increased efficiency offers a potential time saving of up to 45 minutes per day for users Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive. Pole length: 1.13m Can be used: On its own to reach normal ceiling height In conjunction with a Solo telescopic access pole for additional height With Testifire and Solo testing devices Ideal for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Directive Allows for "functional" testing to be carried out Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles Non-conductive glass fibre construction protects engineer from inadvertent shorts
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly. Designed for use with the Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Negates the need for power cables, removing a potential trip hazard Supplied singularly New improved 3.0Ah model Rechargeable via the smart fast battery charger (not included) Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit
The Testifire 6202 smoke/heat/CO detector testing system offers an extended reach of 6 metres, greatly improving it's range compared to the standard version. The kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates amazing time saving benefits for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6202 kit offers a versatile system that offers long term time and cost saving benefits. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag, making this the complete system. Kit includes: Testifire 2000 smoke/heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 601-001 protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life Allows trained personnel to carry out "functional" testing on smoke, heat and CO sensors No pressurised containers needed- stimuli created on demand for smoke and CO sensors
