Click to enlarge
Previous product
WOLFSBURG 1
Back to products
Next product
Solo 808, 809 & 810 - Smoke Detector Testing Starter Packs
Solo

Solo 200 – Universal Detector Removal Tool

With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole

SKU: dc96318a0720 Category: Tag:
Description
Product Code NCSOLO200
Brand Solo
Suitability

Smoke, CO & heat detectors
Weight 1.45kg
Product Datasheets Solo Product Datasheet

  • Testifire Datasheet

    • Related products

    Close

    Solo 365 Replacement Smoke Generator

    This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van
    Close

    Solo 100 & 108 – Telescopic Access Poles

    An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use. Suitable for use with both Solo and Testifire branded products Required for access to detectors out of normal reach Lightweight non-conductive glass fibre construction Optimum strength to weight ratio ensures minimum possible whip or bend at height Easy to use locking mechanism Available in two lengths: Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Designed for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out
    Close

    Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless

    Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely. Eliminates the need for ladders and expensive scaffolding Ensures compliance with the Safe Working at Height Regulations 2005 Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo 461 cordless heat detector test set Solo A10 smoke detector tester spray (150ml canister) Solo 610 protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height) Non-conductive telescopic access and extension poles Suitable for the majority of modern smoke and heat detectors Detectors can be accessed out of normal reach No trailing cables - complies with the Health and Safety at Work regulations Smoke dispenser introduces simulated smoke to the detector Heat detector tester directs hot air into the sensor Allows "functional" testing to be carried out
    Close

    Solo 423 & 424 – Mains Powered Heat Detector Testers

    The Solo mains powered heat detector testers are designed specifically for checking heat detectors using a genuine and safe heat source. Available in two voltage versions, the mains powered heat detector testers are supplied with a 5m (16ft) cable and are suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C (194 °F). The Solo telescopic poles allow the tester to access heat detectors at height, therefore eliminating the need for ladders or scaffolding. Provides detectors with a genuine and safe heat source Designed in accordance with the Construction Regulations 1996 and the Electricity at Work Regulations 1989 Suitable for the majority of modern heat detectors Can be used on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F Rapid activation times Available in two versions: Solo 423 - 110/120V Solo 424 - 220/240V Lightweight and easy to use Supplied with a 5m/16ft cable as standard Compatible with Solo telescopic poles for testing at height
    Close

    Solo 365 Spare Battery Pack

    The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site. Designed for use only with Solo 365 equipment Available individually and in packs of 4 Small, lightweight design makes carrying spares far easier than traditional Solo battery batons High-capacity Lithium Ion technology Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit Test more detectors in less time by carrying spares instead of going back to the van
    Close

    Solo 365 Field Service Pack

    Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order. Designed for use only with Solo 365 equipment Easy to install, field-replaceable design – no service requirement Test more detectors in less time by carrying spares instead of going back to the van The field service pack contains: 1x Cup & Membrane 1x Smoke Generator 1x Lithium Ion Battery Pack Small, lightweight component designs make carrying spares far easier Reduced downtime due to damaged equipment Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
    Close

    Solo 811 & 812 – Smoke Detector Test and Removal Kits

    Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag. Ensures technicians comply with the Safe Working at Height Regulations 2005 Negates the need for ladders or expensive scaffolding Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo A10 smoke detector tester spray (150ml canister) Solo 610 Protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height) Smoke dispenser is suitable for detectors up to 100mm/4" in diameter Removal tool creates various size combinations for the majority of detectors Non-conductive glass fibre access poles Allows "functional" testing to be carried out
    Close

    Solo 365 Universal Charging Kit

    The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere. Designed for use with the Solo 365 Battery Pack Works with most USB power sources and a wide range of international power supplies Supplied with transformer block to provide optimum voltage and current Simple click-on plug face design No large "power brick" required, reducing bulk and weight for transportation Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.