Product Code |
|
||||
---|---|---|---|---|---|
Brand | Testifire | ||||
Manufacturer Part Number |
3 Capsules: TC3-3PACK-001 6 Capsules: TC3-6PACK-001 |
||||
Weight |
3 Capsule: 0.14kg 6 Capsule: 0.28kg |
||||
Weight |
NCTFRCO3: 0.14kg NCTFRCO6: 0.28kg |
||||
Product Datasheets | Testifire Datasheet |
Testifire Replacement Carbon Monoxide Capsules 3 or 6 Pack
These TC3 replacement carbon monoxide (CO) capsules are for use with Testifire’s 2000 series of remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a crucial part of the Testifire 2000 series system. Replacement smoke capsules can also be purchased for this system.
Designed for Testifire equipment
Choice of 3 pack or 6 pack
Fantastic alternative to stored pressure canisters
Generates smoke as and when needed
Colour coded green for simple identification
Individual capsules weigh just 45g
Description
Related products
Solo 365 Field Service Pack
Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order.
Designed for use only with Solo 365 equipment
Easy to install, field-replaceable design – no service requirement
Test more detectors in less time by carrying spares instead of going back to the van
The field service pack contains:
1x Cup & Membrane
1x Smoke Generator
1x Lithium Ion Battery Pack
Small, lightweight component designs make carrying spares far easier
Reduced downtime due to damaged equipment
Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
Solo 461 – Cordless Heat Detector Tester Kit
The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation.
Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor
UL and ULC listed
No trailing cables - fully complies with Health and Safety at Work regulations
Battery operated - supplied with two battery batons
Provides rapid detector activation
Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre)
Visual low battery indicator
Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter)
Quiet fan motor for discreet operation
Lightweight and easy to use
Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately)
Suitable for use at angles
1 year manufacturer's warranty
Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs
Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required.
Allows the access of smoke detectors out of normal reach
Non-conductive glass fibre extension and telescopic access poles
Smoke dispenser introduces simulated smoke to the detector
Pack includes:
Solo A10 smoke detector tester (150ml canister)
Solo 330 smoke dispenser
Telescopic access or extension pole (three lengths available)
Three access poles to choose from:
Solo 101 - 1.13m extension pole (2.5m working height)
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Suitable for detectors up to 100mm/4" in diameter
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive.
Pole length: 1.13m
Can be used:
On its own to reach normal ceiling height
In conjunction with a Solo telescopic access pole for additional height
With Testifire and Solo testing devices
Ideal for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Directive
Allows for "functional" testing to be carried out
Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles
Non-conductive glass fibre construction protects engineer from inadvertent shorts
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders.
Allows "functional" smoke and CO alarm testing to be carried out
Extension access pole enables reach of alarms at normal ceiling height
Kit includes
Solo 332 Large Smoke Dispenser
Solo 101 Extension Access Pole
Solo A10 Smoke Detector Tester (150ml)
Solo C3 Carbon Monoxide Detector Tester (250ml)
Ideal for use by facilities management and maintenance companies
Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter
Introduces the activating element without flooding the alarms
Suitable for most domestic smoke and CO alarms
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held - no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.