Showing 1–12 of 99 results

ECOGRIP MITAR LeMan Cut 5

The cut protection glove MITAR LeMan CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high en cut protection (Level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.

The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.

The glove was made by Dermatest® on his Skin tolerance tested and received the grade "very good".

ECOGRIP MITAR HIBERNIA CUT 5

The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.

The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.

The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”. 

ACER I

The assembly glove ACER 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.

The ½ immersion from high-tech micro- Nitrile foam works very well for the Ha ndling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.

The extremely fine protective glove made of polyamide is certified according to EN 388: 2003 (4 1 2 1).

The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".

ADLER 2

The cut protection glove ADLER 2 by W + R INDUSTRY is cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.

The glove is certified according to EN 388: 2016 (3 3 3 3)

The palm of the ADLER 2 is made of grain leather, the backhand made of a cotton fabric. The lining on the back of the hand and palm is made of a Kevlar® jersey (complete, including cuff). 

ALUSTAR II

The heat protection glove ALUSTAR 2 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.

The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2). 

The palm of the ALUSTAR 2 is made of red cow split leather, the backhand made of aluminum-coated split leather. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.

ALUSTAR III

The heat protection glove ALUSTAR 3 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.

The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2). 

The palm of the ALUSTAR 3 is made of red split leather, the backhand made of aluminum-coated split leather, including that of the inserted thumb. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.

ANATOMIC ECO I

The work glove ANATOMIC ECO I by W + R INDUSTRY in Canadian style offers perfect wearing comfort thanks to its anatomical fit.

The palm and the knuckle protection are made of grain leather, the backhand is made of abrasion-resistant m and breathable cotton twill. The lining on the palm is made of soft polyester. The cotton cuff also has a pulse protection!

The glove is certified according to EN 388: 2003 (3 2 3 3).

< / span>

ANATOMIC ECO II

The work glove ANATOMIC ECO II from W + R INDUSTRY in Canadian style offers perfect wearing comfort thanks to its anatomical fit.

The palm and the knuckle protection are made of cow split leather, the backhand is made of abrasion-resistant u nd breathable cotton twill. The lining on the palm is made of soft polyester. The cotton cuff also has a pulse protection.

The glove is certified according to EN 388: 2003 (4 2 4 4).

& nbsp ;

BLACK HAWK

The cut protection glove BLACK HAWK by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.

The glove is certified according to EN 388: 2016 (3 3 3 4 X).

The palm of the BLACK HAWK is made of turned goatskin, the backhand made of goat grain leather. The lining on the back of the hand is made of cotton interlock, the inside of the hand is made of Kevlar®. The short cuff is made of turned goatskin.

BLUETEC DYNAFORCE C

The cut protection glove Dynaforce C < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine one Glove made of HPPE yarn with technical basalt fiber is certified according to DIN EN 388: 2016 (4 X 3 3 C) and has a medium cut protection (level C) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce C is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.

    < li class = "cs64D34F3">

BLUETEC DYNAFORCE D

The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.

The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.

BLUETEC DYNAFORCE F

The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.