Showing 1–12 of 18 results

Uniphos Gas Detector Tube

More than 200 different UNIPHOS Gas Detection Tubes are available-accurately make spot measurements for over 500 gases and vapours. The short-term UNIPHOS Gas Detection Tubes are used with the ASP-40 Air Sampling Pump. Gas detector tubes provide a simple measurement technique-detect toxic gas concentration in air samples. The tubes are pre-calibrated and take only a few minutes-complete sampling. The concentration is read directly from the length of color stain. Features
  •  Highly specific-target gas
  •  Simple device
  •  No requirement of complicated accessories
  •  No requirement of specialist-operate
  •  It is pre-calibrated and reads directly the target gas concentration
  •  Available for most of the industrial toxic gases and chemical vapours
Application Areas

It is useful for the air monitoring at work place & confined space in Industries like:

  •  Petrochemical & Refineries
  •  Pharmaceutical
  •  Chemical & Fertilizer
  •  Fumigation
  •  Food Industry
  •  Pulp & Paper Mills Industries
  •  Power & Steel Plants
  •  Municipal Corporations
  •  Environmental monitoring agencies and many more

Automatic – FOUR ZONE GAS MONITOR UNIPHOS FUMITRACK Automatic 4 Zone Fumigation Gas Monitor

A fully automatic, 4-port, unmanned monitoring system which can make periodic measurement and keep the sensor idle between measurements after flushing it with fresh air, resulting in longer life for electrochemical sensors.

CF000161–Uniphos Tubes-Plastic Pump R( ASP-11P ) – ER( 100cc)

CF000161--Uniphos Tubes-Plastic Pump R( ASP-11P ) - ER( 100cc)

CF000769–Uniphos Tubes-Air Sampling Pump R( ASP-40 ) – ER( 100cc)

100,00 90,00
CF000769--Uniphos Tubes-Air Sampling Pump R( ASP-40 ) - ER( 100cc)

MBr Methyl Bromide UNIPHOS 351M MBr-Lo Gas Monitor

It comes with an inbuilt sample draw pump and data logging facility with sample identity and date-time stamp. It has two models

  • Fumisense Pro MBr-Lo for leak detection and personal protection application
  • Range: 0-200 PPM | Resolution: 1 PPM
  • Fumisense Pro MBr-Hi for fumigation monitoring application
  • Range: 0-200 mg/L | Resolution: 1 mg/L

PH3 & MBr DUAL GAS MONITOR UNIPHOS Fumisense Dual Gas Monitor (PH3 and Mbr)

The UNIPHOS FUMISENSE is a microprocessor based Dual-Gas monitor with two separate inbuilt pump for Phosphine and Methyl Bromide respectively. This table top portable instrument can be carried from ware house to ware house and to different silos to monitor phosphine or methyl bromide concentration during fumigation. It has the provision to log the data with ware house number, silo number, sample- Location (Top, Middle & Bottom), Gas conc., Gas Name, Date & Time. It is provided with GUI to sort out the data and generate report at the end of fumigation.

Sulphuryl Flouride UNIPHOS Fumispec – Lo

UNIPHOS Fumispec-Lo is a battery operated microprocessor based portable instrument for the measurement of SO2F2 in the range of 0-100ppm. It is mainly designed for Leak detection, during and after fumigation. Can also be used for monitoring for personal protection and safety.

UNIPHOS 350M-Phosphine Alert PH3 Lo Gas Monitor

For detection of PH3 at TLV level, for personal protection and safety.

UNIPHOS Fumisense Pro Mbr-(Lo/Hi) with inbuilt pump

An ideal instrument for MBr monitoring for personal protection and safety. It can also be used to detect leaks from the fumigation chamber

UNIPHOS Fumisense Pro PH3-Hi (CO) with inbuilt pump

For detection of PH3 at TLV level, for personal protection and safety.

UNIPHOS Fumisense Pro PH3-Hi with inbuilt pump

These are paper strips impregnated with sensing chemicals by a special process for semiquantitative measurement of phosphine. The strip on exposure to PH3 gas changes its colour. The time it takes to change the colour is related to the PH3 gas concentration. They are used for checking the fumigated area after aeration and to see if the area is safe for entry. These strips can also be given to the workers as badges when they are working in/near fumigated stacks.