| Product Code | NC365ASD |
|---|---|
| Alternative Product Codes | Solo372-001 |
| Brand | Solo 365 |
| Weight | 0.50kg |
| Product Datasheets | Solo 372 ASD Adaptor Instructions V2 |
Be safe at Vertex Safety
Solo 365 Adaptor for ASD Systems
Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365’s delayed start function combined with the adaptor’s directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment.
No-fuss functional testing of aspirating smoke detection systems
Designed for use only with Solo 365 equipment
Quick and easy to fit while on the job
Small and lightweight – can be kept on hand at all times
Controlled smoke delivery for less wastage and more efficient testing
Allows testing of both ASD and point detectors with a single, portable device
Works with the Solo 365’s delayed start and manual purge options
Slimline design enables access to awkwardly positioned detectors
Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.
Description
Related products
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out. Designed for use only with Solo 365 equipment Supplied in packs of 3 cartridges Provides on-demand smoke for accurate testing and minimal wastage Non-pressurised for safe storage and transportation Small and lightweight, can easily be carried in pockets Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector. A choice of 150ml or 250ml canisters Delivers smoke replicated particles to a detector Provides a fast detector activation and clearing time Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser Non-flammable Non-toxic Produced no harmful residue Suitable for all types and makes of smoke detector UL and ULC listed
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage. Designed for use only with Solo 365 equipment Quick and easy to swap out while on the job Controlled smoke delivery for less wastage and more efficient testing See-through plastic lets engineers check indicator LEDs on detectors Contains simulated smoke to prevent wastage and increase test efficiency Works with the Solo 365's integrated proximity sensor for automated testing Pivots independently from the head unit to fit over hard-to-reach detectors
Testifire Replacement Smoke Capsules 3 or 6 Pack
These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit. Designed for Testifire equipment Choice of 3 pack or 6 pack Generates smoke as and when needed Unlike most remote testing equipment, does not use stored pressure canisters Colour coded blue for simple identification Individual capsules weigh just 45g
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders. Allows "functional" smoke and CO alarm testing to be carried out Extension access pole enables reach of alarms at normal ceiling height Kit includes Solo 332 Large Smoke Dispenser Solo 101 Extension Access Pole Solo A10 Smoke Detector Tester (150ml) Solo C3 Carbon Monoxide Detector Tester (250ml) Ideal for use by facilities management and maintenance companies Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter Introduces the activating element without flooding the alarms Suitable for most domestic smoke and CO alarms
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights
Testifire Replacement Carbon Monoxide Capsules 3 or 6 Pack
These TC3 replacement carbon monoxide (CO) capsules are for use with Testifire's 2000 series of remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a crucial part of the Testifire 2000 series system. Replacement smoke capsules can also be purchased for this system. Designed for Testifire equipment Choice of 3 pack or 6 pack Fantastic alternative to stored pressure canisters Generates smoke as and when needed Colour coded green for simple identification Individual capsules weigh just 45g
