| Product Code |
|
||||
|---|---|---|---|---|---|
| Brand | Solo | ||||
| Available Sizes |
6m Working Height: 1 x 4.5m telescopic access pole 8.2m Working Height: 1 x 4.5m telescopic pole AND 2 x 1.13m extension poles |
||||
| Kit Contents |
1 x Solo A10 smoke detector tester 1 x Solo 330 smoke dispenser 1 x Solo universal removal tool 1 x Protective carry/storage bag Telescopic access pole(s) |
||||
| Weight |
NCSOLO811: 10.90kg NCSOLO812: 11.75kg |
||||
| Product Datasheets | Solo Product Datasheet |
Solo 811 & 812 – Smoke Detector Test and Removal Kits
Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag.
Ensures technicians comply with the Safe Working at Height Regulations 2005
Negates the need for ladders or expensive scaffolding
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 Protective carry/storage bag
Telescopic access pole(s) – depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height)
Smoke dispenser is suitable for detectors up to 100mm/4″ in diameter
Removal tool creates various size combinations for the majority of detectors
Non-conductive glass fibre access poles
Allows “functional” testing to be carried out
Description
Related products
Solo 365 Field Service Pack
Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order.
Designed for use only with Solo 365 equipment
Easy to install, field-replaceable design – no service requirement
Test more detectors in less time by carrying spares instead of going back to the van
The field service pack contains:
1x Cup & Membrane
1x Smoke Generator
1x Lithium Ion Battery Pack
Small, lightweight component designs make carrying spares far easier
Reduced downtime due to damaged equipment
Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
Solo 100 & 108 – Telescopic Access Poles
An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use.
Suitable for use with both Solo and Testifire branded products
Required for access to detectors out of normal reach
Lightweight non-conductive glass fibre construction
Optimum strength to weight ratio ensures minimum possible whip or bend at height
Easy to use locking mechanism
Available in two lengths:
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Designed for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held - no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Solo 423 & 424 – Mains Powered Heat Detector Testers
The Solo mains powered heat detector testers are designed specifically for checking heat detectors using a genuine and safe heat source. Available in two voltage versions, the mains powered heat detector testers are supplied with a 5m (16ft) cable and are suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C (194 °F). The Solo telescopic poles allow the tester to access heat detectors at height, therefore eliminating the need for ladders or scaffolding.
Provides detectors with a genuine and safe heat source
Designed in accordance with the Construction Regulations 1996 and the Electricity at Work Regulations 1989
Suitable for the majority of modern heat detectors
Can be used on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F
Rapid activation times
Available in two versions:
Solo 423 - 110/120V
Solo 424 - 220/240V
Lightweight and easy to use
Supplied with a 5m/16ft cable as standard
Compatible with Solo telescopic poles for testing at height
Solo 911 – 6m Test and Removal Kit with Solo 365
The Solo 911 smoke detector testing kit allows engineers to reach heights of up to 6m without the need for ladders, harnesses, or other equipment that may need special training and risk assessments. Using the new Solo 365 testing system there is no longer a need to store or transport pressurised aerosols while the battery has also been changed to a much smaller and lighter design that charges via MicroUSB. These improvements make carrying spare batteries and test smoke much easier, especially with the Solo 610 protective bag, while the addition of the Solo 200 detector removal tool means that this kit is ideal for any fire alarm engineer.
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Includes a Solo 100 telescopic access pole
Also compatible with other Solo poles including the 108 and 101
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Slimline design enables access to awkwardly positioned detectors
Auto-LED torch for testing in dark areas
Also suitable for aspirating smoke detection systems with the Solo 372 ASD adaptor (sold separately)
Solo 365 Spare Battery Pack
The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site.
Designed for use only with Solo 365 equipment
Available individually and in packs of 4
Small, lightweight design makes carrying spares far easier than traditional Solo battery batons
High-capacity Lithium Ion technology
Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit
Test more detectors in less time by carrying spares instead of going back to the van
