C10 DA Valve
The 3/4 x 16 UN C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in stainless steel.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
3/4″ x 16 UN
Outlet Connection:
5/18″ UNF-F
Material:
Stainless Steel
Warranty:
1 year
Related products
Cannister Bag
C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year
Pump Flow Valve
High Pressure Fixed Flow Regulator
It is compatible with all gas cylinders with standard C10 connections and is available in variety outlet flows and can be used with gas mixture in disposable cylinders.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.3 to 7 L/Mn at 4 bar pressure
Inlet Connection:
1/4“ NPT F for the high Pressure
Outlet Connection:
1/4“ NPT F for the high Pressure
Material:
Brass & Stainless Steel
Warranty:
1 year
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
S Flow Regulator
An Economical Alternative to the fixed flow regulator and comes with adjustable flow rates.
The S-Flow regulator comes with ON/OFF knob and a rotameter to indicate flow rates.
SPECIFICATIONS
Inlet Pressure:
70 bar or 35 bar
Outlet Flow:
0.25L/Mn, 0.5 L/Mn, 0.75L/Mn, 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
CGA 165 Valve
Push Button Fixed Flow Regulator
Push Button Regulator comes with a ON/OFF button on its top as preventive measure for accidental loss of gas and is mainly used for Bump Testing.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Taper Shank Adaptable to Polyurethane Tube
Material:
Brass & Stainless Steel
Warranty:
1 year