Mini Flow C10 Valve
It is used with the 20 litre mini gas cylinder.
Designed with a simple on/off valve the gas flow is regulated through a Rotameter.
SPECIFICATIONS
Inlet Pressure:
35 bar
Outlet Flow:
0 to 1 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or CGA 600 or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
Related products
Rupture Disk C10 Valve
This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder.
The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18” UNF-F
Material:
Stainless Steel
Warranty:
1 year
S Flow Regulator
An Economical Alternative to the fixed flow regulator and comes with adjustable flow rates.
The S-Flow regulator comes with ON/OFF knob and a rotameter to indicate flow rates.
SPECIFICATIONS
Inlet Pressure:
70 bar or 35 bar
Outlet Flow:
0.25L/Mn, 0.5 L/Mn, 0.75L/Mn, 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
Micro Demand Flow Regulator
Micro DFR is normally off and can only be operational by negative suction greater than 3“ water column in all gas instruments which have internal pumps.
DFR helps in eliminating the need for flow meters and sample bags.
SPECIFICATIONS
Inlet Pressure:
70 bar or 124 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
CGA 590 15/16” x 14 UN-M or CGA 350 13/16” x 14 UN-F or CGA 600 1” x 20 UNEF or C10 5/8”x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
Push Button Fixed Flow Regulator
Push Button Regulator comes with a ON/OFF button on its top as preventive measure for accidental loss of gas and is mainly used for Bump Testing.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Taper Shank Adaptable to Polyurethane Tube
Material:
Brass & Stainless Steel
Warranty:
1 year
Bump Test Fixed Flow Regulator
Bump test is a functional test of a gas monitor.
This regulator is used for calibration and working of Bump test for known quantity gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
1/8” BSP or NPT-F
Material:
Brass
Warranty:
1 year
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
Hybrid Fixed Flow Regulator
The Hybrid type Fixed flow regulator comes with unique design that can be used with disposable cylinders filled with reactive gases.
It comprises of an aluminium cap and stainless-steel body which can be used for corrosive gasses. The aluminium cap contributes to reduction in weight and size of the regulator.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.3 to 7 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection
Material:
Stainless Steel (Body) & Aluminium (Cap)
Warranty:
1 year
Fixed Flow Regulator
Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a C10 connection.
It is one of the most common regulators used in the world of gas Calibration and comes with a wide range of flows that are set as per your need.
Suitable for Oxygen as all parts are made of Brass and range from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn to 25.0 L/Mn
Inlet Connection:
C10 ( 5/8″ x 18 UNF -M )
Outlet Connection:
Barbed connection
Material:
Brass / Stainless Steel
Warranty:
1 year