CGA 165 Valve
This valve is light in weight comes with a ON/OFF knob and a brass CGA 165 outlet connection where a free nut is fitted for coupling.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
1”x14 UNS
Outlet Connection:
CGA 165
Material:
Aluminium
Warranty:
1 year
Related products
Rupture Disk C10 Valve
This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder.
The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18” UNF-F
Material:
Stainless Steel
Warranty:
1 year
Baloon Fixed Flow Regulator
Mainly used for calibration and filling of weather balloons.
Balloon regulator has a unique outlet with a flow rate of 15 L/Mn and can be used on cylinders with standard c10 connection.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Balloon connection
Material:
Brass
Warranty:
1 year
CGA 600 Adapter
The CGA 600 Adapter is used on non-reactive gas cylinders for connecting Fixed Flow regulators, Demand Flow Regulators, Trigger Regulators, Push button Regulators and Multi Flow Regulators.
Adapts the any Litre-bottle male thread connection (CGA600) to the any litre-bottle/regulator female thread connection (C10).
SPECIFICATIONS
Inlet Pressure:
90 bar max
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
1”/20 UNEF-F
Material:
Brass or Stainless Steel
Warranty:
1 Year
C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year
CGA 600 Valve
Trigger Fixed Flow Regulator
The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders.
The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
6mm Straight tube
Material:
Brass
Warranty:
1 year
Push Lever Fixed Flow Regulator
The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass & Stainless Steel
Warranty:
1 year
Duo Fixed Flow Regulator
The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.
Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material:
Brass
Warranty:
1 year