CGA 600 Valve
The Standard CGA 600 valve is used for 17 Litres and 34 Litres steel cylinders.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
1”x20 UNEF-M
Material:
Stainless Steel
Warranty:
1 year
Related products
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
Trigger Fixed Flow Regulator
The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders.
The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
6mm Straight tube
Material:
Brass
Warranty:
1 year
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
High Pressure Fixed Flow Regulator
It is compatible with all gas cylinders with standard C10 connections and is available in variety outlet flows and can be used with gas mixture in disposable cylinders.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.3 to 7 L/Mn at 4 bar pressure
Inlet Connection:
1/4“ NPT F for the high Pressure
Outlet Connection:
1/4“ NPT F for the high Pressure
Material:
Brass & Stainless Steel
Warranty:
1 year
C10 DA Valve
Multi Flow Regulator
Multi Flow regulator is a single stage piston style regulator. The regulator has 9 selectable flow settings. Used with corrosive and non-corrosive gases.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0 to 3 L/Mn, 0 to 5 L/Mn, 0 to 8 L/Mn, 0 to 15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed or Compression fitting
Material:
Brass or Stainless Steel
Warranty:
1 year
Fixed Flow Regulator
Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a C10 connection.
It is one of the most common regulators used in the world of gas Calibration and comes with a wide range of flows that are set as per your need.
Suitable for Oxygen as all parts are made of Brass and range from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn to 25.0 L/Mn
Inlet Connection:
C10 ( 5/8″ x 18 UNF -M )
Outlet Connection:
Barbed connection
Material:
Brass / Stainless Steel
Warranty:
1 year
C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year