Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held - no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Solo 365 Universal Charging Kit
The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere.
Designed for use with the Solo 365 Battery Pack
Works with most USB power sources and a wide range of international power supplies
Supplied with transformer block to provide optimum voltage and current
Simple click-on plug face design
No large "power brick" required, reducing bulk and weight for transportation
Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height.
Cable length: 5m/16ft
Designed to help power Solo mains heat detector testers
Needed for applications where multiple telescopic or extension poles are used
Allows testing of heat detectors mounted at greater height
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out.
Designed for use only with Solo 365 equipment
Supplied in packs of 3 cartridges
Provides on-demand smoke for accurate testing and minimal wastage
Non-pressurised for safe storage and transportation
Small and lightweight, can easily be carried in pockets
Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers
Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive.
Pole length: 1.13m
Can be used:
On its own to reach normal ceiling height
In conjunction with a Solo telescopic access pole for additional height
With Testifire and Solo testing devices
Ideal for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Directive
Allows for "functional" testing to be carried out
Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles
Non-conductive glass fibre construction protects engineer from inadvertent shorts
Solo 365 Adaptor for ASD Systems
Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment.
No-fuss functional testing of aspirating smoke detection systems
Designed for use only with Solo 365 equipment
Quick and easy to fit while on the job
Small and lightweight – can be kept on hand at all times
Controlled smoke delivery for less wastage and more efficient testing
Allows testing of both ASD and point detectors with a single, portable device
Works with the Solo 365's delayed start and manual purge options
Slimline design enables access to awkwardly positioned detectors
Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.
Solo 365 Spare Battery Pack
The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site.
Designed for use only with Solo 365 equipment
Available individually and in packs of 4
Small, lightweight design makes carrying spares far easier than traditional Solo battery batons
High-capacity Lithium Ion technology
Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit
Test more detectors in less time by carrying spares instead of going back to the van
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly.
Designed for use with the Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Negates the need for power cables, removing a potential trip hazard
Supplied singularly
New improved 3.0Ah model
Rechargeable via the smart fast battery charger (not included)
Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes.
Designed for recharging Solo 770 battery batons
Provides power for Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Offers a rapid charging time of just 90 minutes
Supplied with 12V and mains connections
Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
Testifire Replacement Smoke Capsules 3 or 6 Pack
These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit.
Designed for Testifire equipment
Choice of 3 pack or 6 pack
Generates smoke as and when needed
Unlike most remote testing equipment, does not use stored pressure canisters
Colour coded blue for simple identification
Individual capsules weigh just 45g
Solo 610 – Protective Storage Bag
This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site
Testifire Replacement Carbon Monoxide Capsules 3 or 6 Pack
These TC3 replacement carbon monoxide (CO) capsules are for use with Testifire's 2000 series of remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a crucial part of the Testifire 2000 series system. Replacement smoke capsules can also be purchased for this system.
Designed for Testifire equipment
Choice of 3 pack or 6 pack
Fantastic alternative to stored pressure canisters
Generates smoke as and when needed
Colour coded green for simple identification
Individual capsules weigh just 45g
Solo 100 & 108 – Telescopic Access Poles
An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use.
Suitable for use with both Solo and Testifire branded products
Required for access to detectors out of normal reach
Lightweight non-conductive glass fibre construction
Optimum strength to weight ratio ensures minimum possible whip or bend at height
Easy to use locking mechanism
Available in two lengths:
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Designed for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole.
Allows "functional" smoke detector testing to be carried out
Durable construction and lightweight
UL listed
Universal: suitable for detectors up to 100mm/4" in diameter
Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste
Transparent test cup enables clear view of the detector LED while testing
Suitable for use on suspended ceiling tiles
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not supplied)
Used with the Solo telescopic access poles: enables safe testing at heights
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason.
Designed for use only with Solo 365 equipment
Works with the ES3 Smoke Cartridge
Automatically creates smoke when the Solo 365 cup is over a detector head
On-demand, 5-second smoke cycles prevent wastage and detector contamination
Easy to install, field-replaceable design – no manufacturer service required
Test more detectors in less time by carrying spares instead of going back to the van
Solo 200 – Universal Detector Removal Tool
With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole
Solo 332 – Large Smoke Dispenser
Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height.
Allows "functional" smoke detector testing to be carried out
UL listed
Robust and lightweight
Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter
Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery
Clear cup ensures 360 degree view of the detector
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not included)
Can be used with the Solo telescopic and extension access poles for safe testing at heights
Suitable for use when testing domestic smoke and CO alarms
Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs
Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required.
Allows the access of smoke detectors out of normal reach
Non-conductive glass fibre extension and telescopic access poles
Smoke dispenser introduces simulated smoke to the detector
Pack includes:
Solo A10 smoke detector tester (150ml canister)
Solo 330 smoke dispenser
Telescopic access or extension pole (three lengths available)
Three access poles to choose from:
Solo 101 - 1.13m extension pole (2.5m working height)
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Suitable for detectors up to 100mm/4" in diameter
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo 365 Field Service Pack
Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order.
Designed for use only with Solo 365 equipment
Easy to install, field-replaceable design – no service requirement
Test more detectors in less time by carrying spares instead of going back to the van
The field service pack contains:
1x Cup & Membrane
1x Smoke Generator
1x Lithium Ion Battery Pack
Small, lightweight component designs make carrying spares far easier
Reduced downtime due to damaged equipment
Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders.
Allows "functional" smoke and CO alarm testing to be carried out
Extension access pole enables reach of alarms at normal ceiling height
Kit includes
Solo 332 Large Smoke Dispenser
Solo 101 Extension Access Pole
Solo A10 Smoke Detector Tester (150ml)
Solo C3 Carbon Monoxide Detector Tester (250ml)
Ideal for use by facilities management and maintenance companies
Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter
Introduces the activating element without flooding the alarms
Suitable for most domestic smoke and CO alarms
Solo 423 & 424 – Mains Powered Heat Detector Testers
The Solo mains powered heat detector testers are designed specifically for checking heat detectors using a genuine and safe heat source. Available in two voltage versions, the mains powered heat detector testers are supplied with a 5m (16ft) cable and are suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C (194 °F). The Solo telescopic poles allow the tester to access heat detectors at height, therefore eliminating the need for ladders or scaffolding.
Provides detectors with a genuine and safe heat source
Designed in accordance with the Construction Regulations 1996 and the Electricity at Work Regulations 1989
Suitable for the majority of modern heat detectors
Can be used on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F
Rapid activation times
Available in two versions:
Solo 423 - 110/120V
Solo 424 - 220/240V
Lightweight and easy to use
Supplied with a 5m/16ft cable as standard
Compatible with Solo telescopic poles for testing at height