Solo 610 – Protective Storage Bag
This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes.
Designed for recharging Solo 770 battery batons
Provides power for Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Offers a rapid charging time of just 90 minutes
Supplied with 12V and mains connections
Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly.
Designed for use with the Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Negates the need for power cables, removing a potential trip hazard
Supplied singularly
New improved 3.0Ah model
Rechargeable via the smart fast battery charger (not included)
Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Solo 811 & 812 – Smoke Detector Test and Removal Kits
Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag.
Ensures technicians comply with the Safe Working at Height Regulations 2005
Negates the need for ladders or expensive scaffolding
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 Protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height)
Smoke dispenser is suitable for detectors up to 100mm/4" in diameter
Removal tool creates various size combinations for the majority of detectors
Non-conductive glass fibre access poles
Allows "functional" testing to be carried out
Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains
The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor.
Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors
Allows "functional" testing to be carried out
Enables a working height of 6 metres
Kit includes:
Solo 4.5m telescopic access pole
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 220/240V mains powered heat detector tester
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic pole has a non-conductive glass fibre construction
Ensures compliance with the Safe Working at Height Regulations 2005
Single telescopic pole suits all three equipment head tools
Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless
Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely.
Eliminates the need for ladders and expensive scaffolding
Ensures compliance with the Safe Working at Height Regulations 2005
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 461 cordless heat detector test set
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height)
Non-conductive telescopic access and extension poles
Suitable for the majority of modern smoke and heat detectors
Detectors can be accessed out of normal reach
No trailing cables - complies with the Health and Safety at Work regulations
Smoke dispenser introduces simulated smoke to the detector
Heat detector tester directs hot air into the sensor
Allows "functional" testing to be carried out
Solo 908 – 4m Test Kit with Solo 365
The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit.
Slimline design allows easy access to awkwardly positioned detectors
Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres)
Automatic LED torch for testing in dark areas
Compatible with standard Solo poles including the 100 and 101
Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Solo 911 – 6m Test and Removal Kit with Solo 365
The Solo 911 smoke detector testing kit allows engineers to reach heights of up to 6m without the need for ladders, harnesses, or other equipment that may need special training and risk assessments. Using the new Solo 365 testing system there is no longer a need to store or transport pressurised aerosols while the battery has also been changed to a much smaller and lighter design that charges via MicroUSB. These improvements make carrying spare batteries and test smoke much easier, especially with the Solo 610 protective bag, while the addition of the Solo 200 detector removal tool means that this kit is ideal for any fire alarm engineer.
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Includes a Solo 100 telescopic access pole
Also compatible with other Solo poles including the 108 and 101
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Slimline design enables access to awkwardly positioned detectors
Auto-LED torch for testing in dark areas
Also suitable for aspirating smoke detection systems with the Solo 372 ASD adaptor (sold separately)
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held - no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders.
Allows "functional" smoke and CO alarm testing to be carried out
Extension access pole enables reach of alarms at normal ceiling height
Kit includes
Solo 332 Large Smoke Dispenser
Solo 101 Extension Access Pole
Solo A10 Smoke Detector Tester (150ml)
Solo C3 Carbon Monoxide Detector Tester (250ml)
Ideal for use by facilities management and maintenance companies
Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter
Introduces the activating element without flooding the alarms
Suitable for most domestic smoke and CO alarms
Testifire 1000 Smoke/Heat Detector Tester – Head Unit
Testifire products offer multi-sensor testing capabilities. The Testifire 1000-001 replacement smoke/heat detector tester can be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors that are out of reach. The unit is supplied with the required smoke capsule.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
Capable of testing both heat and smoke detectors
User friendly programmable interface
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke generated as needed from capsule
Increased efficiency offers potential time saving of 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 1002 Smoke/Heat Detector Testing Kit.
Testifire 1002 Smoke/Heat Detector Testing Kit
The Testifire 1002 Smoke/Heat detector testing kit offers amazing time saving benefits for those providing commercial detector testing services. With automated test initiation and bespoke, programmable test cycles, the Testifire 1002 kit offers substantial long term time and cost saving benefits. This kit also features a clearing function to remove any residual smoke or heat from the sensor quickly, reducing the time for each individual sensor test.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two Solo battery batons
Solo 727 fast charger
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit
The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
User friendly programmable interface
Capable of testing smoke, heat and carbon monoxide (CO) detectors
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke and CO generated as needed from capsules
Increased efficiency offers a potential time saving of up to 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit
This product has been designed to revolutionise commercial fire alarm testing. The Testifire 2002 kit allows trained personnel to carry out "functional" testing on remote smoke, heat and carbon monoxide (CO) sensors without the need for scaffolding, harnesses or ladders. This presents the obvious safety benefits, but also allows users to save an estimated 45 minutes per day by removing the need to set up platforms etc. The device creates the necessary stimuli as needed, meaning there is zero waste, and also offers a clearing function meaning you can move on from having tested a device confident in the knowledge it is clear and ready to go.
Kit includes:
Testifire 2000 Smoke/Heat/CO detector tester
TS3 smoke capsule
TC3 carbon monoxide capsule
Two solo battery batons
Solo 727 fast charger
User friendly programmable interface
Automated infra-red test initiation
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed- both smoke and CO created on demand
Testifire 6002 6m Smoke/Heat Detector Testing Kit
The Testifire 6002 smoke/heat detector testing kit offers an upgraded range of 6 metres which allows climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates an amazing time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6002 kit offers massive long term time and cost saving benefits for those carrying out "functional" testing on devices that are hard to reach by other means. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag as standard.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two solo battery batons
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit
The Testifire 6202 smoke/heat/CO detector testing system offers an extended reach of 6 metres, greatly improving it's range compared to the standard version. The kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates amazing time saving benefits for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6202 kit offers a versatile system that offers long term time and cost saving benefits. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag, making this the complete system.
Kit includes:
Testifire 2000 smoke/heat/CO detector tester
TS3 smoke capsule
TC3 carbon monoxide capsule
Two solo battery batons
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
Allows trained personnel to carry out "functional" testing on smoke, heat and CO sensors
No pressurised containers needed- stimuli created on demand for smoke and CO sensors