| Product Code | NCTF2000 |
|---|---|
| Brand | Testifire |
| Kit Contents | 1x Testifire 2000-001 Head Unit 1x TS3-001 Smoke Capsule 1x TC3-001 Carbon Monoxide Capsule |
| Weight | 1.30kg |
| Product Datasheets | Testifire Datasheet |
Be safe at Vertex Safety
Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit
The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire’s 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage.
Enables trained personnel to carry out “functional” testing on devices that are out of reach
User friendly programmable interface
Capable of testing smoke, heat and carbon monoxide (CO) detectors
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders – smoke and CO generated as needed from capsules
Increased efficiency offers a potential time saving of up to 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
Description
Related products
Testifire Replacement Carbon Monoxide Capsules 3 or 6 Pack
These TC3 replacement carbon monoxide (CO) capsules are for use with Testifire's 2000 series of remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a crucial part of the Testifire 2000 series system. Replacement smoke capsules can also be purchased for this system. Designed for Testifire equipment Choice of 3 pack or 6 pack Fantastic alternative to stored pressure canisters Generates smoke as and when needed Colour coded green for simple identification Individual capsules weigh just 45g
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister. Introduces CO gas to the detector sensor Non-flammable To be used in conjunction with the Solo 330 dispenser A measured amount of CO gas is delivered in a controlled manner Concentration levels below the user danger level Supplied in a non-hazardous pressurised 250ml canister Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit
This product has been designed to revolutionise commercial fire alarm testing. The Testifire 2002 kit allows trained personnel to carry out "functional" testing on remote smoke, heat and carbon monoxide (CO) sensors without the need for scaffolding, harnesses or ladders. This presents the obvious safety benefits, but also allows users to save an estimated 45 minutes per day by removing the need to set up platforms etc. The device creates the necessary stimuli as needed, meaning there is zero waste, and also offers a clearing function meaning you can move on from having tested a device confident in the knowledge it is clear and ready to go. Kit includes: Testifire 2000 Smoke/Heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger User friendly programmable interface Automated infra-red test initiation Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed- both smoke and CO created on demand
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes. Designed for recharging Solo 770 battery batons Provides power for Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Offers a rapid charging time of just 90 minutes Supplied with 12V and mains connections Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height. Cable length: 5m/16ft Designed to help power Solo mains heat detector testers Needed for applications where multiple telescopic or extension poles are used Allows testing of heat detectors mounted at greater height
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders. Allows "functional" smoke and CO alarm testing to be carried out Extension access pole enables reach of alarms at normal ceiling height Kit includes Solo 332 Large Smoke Dispenser Solo 101 Extension Access Pole Solo A10 Smoke Detector Tester (150ml) Solo C3 Carbon Monoxide Detector Tester (250ml) Ideal for use by facilities management and maintenance companies Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter Introduces the activating element without flooding the alarms Suitable for most domestic smoke and CO alarms
