Trigger Fixed Flow Regulator
The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders.
The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
6mm Straight tube
Material:
Brass
Warranty:
1 year
Related products
Pump Flow Valve
C10 DA Valve
Push Lever Fixed Flow Regulator
The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass & Stainless Steel
Warranty:
1 year
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
Mini Flow C10 Valve
It is used with the 20 litre mini gas cylinder.
Designed with a simple on/off valve the gas flow is regulated through a Rotameter.
SPECIFICATIONS
Inlet Pressure:
35 bar
Outlet Flow:
0 to 1 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or CGA 600 or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
Fixed Flow Regulator NPT
Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a NPT connection.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
1/4“ NPT F
Outlet Connection:
Barbed connection
Material:
Stainless Steel
Warranty:
1 year
C10 Valve
The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel.
It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18″ UNF-F
Material:
Brass or stainless steel
Warranty:
1 year
Hybrid Fixed Flow Regulator
The Hybrid type Fixed flow regulator comes with unique design that can be used with disposable cylinders filled with reactive gases.
It comprises of an aluminium cap and stainless-steel body which can be used for corrosive gasses. The aluminium cap contributes to reduction in weight and size of the regulator.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.3 to 7 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection
Material:
Stainless Steel (Body) & Aluminium (Cap)
Warranty:
1 year