Pump Flow Valve
An economical alternative to the standard Demand flow regulator. This is to be used with instruments having built in Vacuum pump.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0 to 3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
Related products
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
Single Stage Regulator
Single-stage gas pressure regulators reduce cylinder pressure to delivery or outlet pressure in a single or one step. Its one of the safest means to reduce pressure and has large supply pressure effect.
The Regulator comes with gauge upto 315 Bar and bottom connection made of stainless steel.
SPECIFICATIONS
Inlet Pressure:
150 bar max
Outlet Pressure:
0-2 bar max
Outlet Flow:
15 L/Mn
Inlet Connection:
1/4” NPT Female- Adaptor to C10 valve
Outlet Connection:
¼” NPT female or 1/8” NPT Female
Regulator Inlet Port:
¼” NPT Female – Adaptor to c10 valve or 1/8” NPT Female
Material:
Stainless Steel and Aluminium
Warranty:
1 year
Duo Fixed Flow Regulator
The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.
Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material:
Brass
Warranty:
1 year
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
CGA 600 Adapter
The CGA 600 Adapter is used on non-reactive gas cylinders for connecting Fixed Flow regulators, Demand Flow Regulators, Trigger Regulators, Push button Regulators and Multi Flow Regulators.
Adapts the any Litre-bottle male thread connection (CGA600) to the any litre-bottle/regulator female thread connection (C10).
SPECIFICATIONS
Inlet Pressure:
90 bar max
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
1”/20 UNEF-F
Material:
Brass or Stainless Steel
Warranty:
1 Year
Baloon Fixed Flow Regulator
Mainly used for calibration and filling of weather balloons.
Balloon regulator has a unique outlet with a flow rate of 15 L/Mn and can be used on cylinders with standard c10 connection.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Balloon connection
Material:
Brass
Warranty:
1 year
Can Puncturing Tool
Mini Flow C10 Valve
It is used with the 20 litre mini gas cylinder.
Designed with a simple on/off valve the gas flow is regulated through a Rotameter.
SPECIFICATIONS
Inlet Pressure:
35 bar
Outlet Flow:
0 to 1 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or CGA 600 or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year