- Ranges: 1-20×103PPM HR
1-200×102PPM HR - Maintenance Free
- Pre-Calibrated Tubes
- Convenient
- Easy to Use
- Uniphos dosimeter tube comes with safe tube holder
Be the first to learn about our latest trends and get exclusive offers
Will be used in accordance with our Privacy Policy
Uniphos Dosimeter tube is a device, very similar to gas detector tubes, that provides the Concentration-Time product (Dose) of phosphine during the entire fumigation duration. But, unlike normal detector tubes, phosphine enters the dosimeter tube by natural diffusion.
The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Hi and / or Lo concentration Phosphine during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.
The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Methyl Bromide during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.
An optical instrument designed to measure the concentration of dust or particulate matter suspended in the exhaust gas passing through a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system.
Dust Analyzer uses the Innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver /Reflector arrangement. Increased particulate density in the stack causes the scattered light intensity to increase. When calibrated against reference standards, the intensity of this signal relates directly to the particulate concentration in the stack, and this can be used to display as a reading in mg/m³.
Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.
Detector tubes enable the user to easily make on the spot measurements of Phosphine in the fumigated area. PH3 Tubes are available both in the lower concentration levels of 0.01 ppm, as well as the fumigation concentration levels of 400 to 5000 ppm.
We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio.
Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.
Detector tubes enable the user to easily make spot measurements of Methyl Bromide in the fumigated area. MBr Tubes are available in the lower concentration levels of 1 ppm.
We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio.
The Uniphos FumiGuard is an advanced continuous gas detection system for detecting Phosphine (PH3). It has been specially designed for applications like fence line or peripheral monitoring of a fumigated area.
It comprises of a master control unit and up to 8 gas detection heads. The modular design of the system enables the user to easily connect multiple detection heads in a loop (daisy chain), saving cable cost in the process. With in-built GSM connectivity, the gas readings are uploaded to the cloud, where they can be viewed from anywhere in the world on a laptop or mobile device and alarm functions can easily be configured, allowing 24/7 perimeter monitoring and ensuring compliance to local regulations.