Click to enlarge
FumiSense Pro PH3 - Lo
Back to products
FumiTrack Multiport with Expansion Module
Uniphos

FumiSpec-Hi

FumiSpec-Hi

Sulfuryl Fluoride is a colorless and odorless gas. It is used as a fumigant in structural and commodity fumigations to control dry wood termites, wood-infesting beetles, and other insects. Like any other fumigant, Inhalation of Sulfuryl Fluoride is very dangerous to human beings and can lead to serious illness or death.  Hence, it is very important to monitor the gas concentrations inside the fumigated area space during the entire fumigation period.  

The Uniphos FumiSpec-Hi is a fully automatic NDIR based Sulfuryl Fluoride analyzer. Housed in a rugged Pelican storm case it continuously monitors gas concentrations in the fumigated space. It can be used as a single port analyzer or as a multi-port analyzer when connected to an Expansion Pack. It is equipped with an inbuilt sampling pump and comes with User-Settable sampling time for each port. The USB interface present in the FumiSpec-Hi enables data logging and the data storage capacity depends on the memory of the flash drive connected to it. 

Compare
Add to wishlist
SKU: 1ea36430157a Category: Tag:
Description
Features
  • NDIR sensor with temperature compensation 
  • Range: 5-260 g/m3 
  • Resolution: 1 g/m3 
  • Color TFT touch-screen interface 
  • On-board data logging with remote data upload to the cloud using GSM technology 
  • Rugged weather-proof case 
Specification
  • Dimensions: 17.32 x 13 x 7 in. / 44 x 33 x 18 cm
  • Weight: 17.37 Lbs./ 8 kgs
  • Temperature Range: 32 to 104 °F / 0 to 40 °C
  • Humidity Range: 0 to 95% (non-condensing)
  • Gas Detected: Sulfuryl Flouride (SO2F2)
  • Concentration Range: 0-6% Vol/ 5 – 260 g/m3
  • Resolution: 0.01 % or 0.1 g/m3
  • Method of Detection: Non-Dispersive Infrared with 10 mm absorption path
  • Accuracy: +/- 2%
  • Sampling: Internal Sample Draw Diaphragm Pump @ 800 ml/min
  • Power Source: 110-240 V AC
  • Display: 7” Touch screen HMI
  • Data Logging: Directly on Flash drive

Related products

NDIR Stack Gas Analyzer

NDIR Stack Gas Analyzer

All diatomic and polyatomic molecules have one or several vibrational modes which can absorb radiation and give rise to a unique absorption spectrum in the infrared region with several absorption lines. Taking any one of the IR absorption lines of the target gas as its finger print, an instrument can be built for measurement of target gas concentration. Infrared technique is endowed with very high specificity when a right choice of the vibrational frequency of the target molecule is made. This technique is cost effective and reliable for measurement of gas concentration in parts per million range. 

The Uniphos NDIR Stack Gas Analyzer are endowed with specificity and have adequate sensitivity for the detection of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks. The in-built powerful pump enables the analyzer to draw the sample from stack. Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Remote calibration. This PLC based analyser incorporates all desired features which makes it user-friendly and fail safe.

Read more
Quick view

FumiSense Pro MBr- Lo

,

FumiSense Pro MBr- Lo

FumiSense Pro-Lo is a handheld Methyl Bromide monitor for monitoring Methyl Bromide levels outside the fumigated stack/ silo/ ship to check for leaks. Equipped with an inbuilt air sampling pump and with the ability to measure MBr up to 200 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.

Read more
Quick view

Fumispec Lo

Fumispec Lo

The Uniphos FumiSpec-Lo is a Single Gas Sulfuryl Fluoride (SO2F2) measurement and alarm monitor designed for leak detection during the fumigation process and in the clearing procedure prior to re-entry.  It is equipped with a non-dispersive infrared, dual wavelength sensor to detect low concentrations of Sulfuryl Fluoride. With user-settable data logging features the device can log gas concentration values with date and time.  

FumiSpec-Lo has been approved by Douglas Products, USA, the owner of the Vikane® and ProFume® fumigant brand and is one of the few devices to pass rigorous testing by the USEPA (United States Environmental Protection Agency) for accuracy and false negatives at the clearance concentration of 1 ppm. 

Read more
Quick view

Dust Analyzer

Dust Analyzer

An optical instrument designed to measure the concentration of dust or particulate matter suspended in the exhaust gas passing through a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. 

Dust Analyzer uses the Innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver /Reflector arrangement. Increased particulate density in the stack causes the scattered light intensity to increase. When calibrated against reference standards, the intensity of this signal relates directly to the particulate concentration in the stack, and this can be used to display as a reading in mg/m³. 

Read more
Quick view

Remote Calibration

Remote Calibration

Remote calibration is the process of remotely triggering either zero or span calibration for a gas analyzer through a web portal. The remote calibration feature in the Uniphos CEMS not only enables access to the analyzer remotely but also assists in performing various activities like zeroing, calibration and validation of the analyzer remotely.

Read more
Quick view

FumiTrack – Single Port

FumiTrack - Single Port

The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Methyl Bromide during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.  

Read more
Quick view

Uniphos Envirotrack

Uniphos Envirotrack

The Uniphos Envirotrack is microprocessor based portable instrument custom made to measure the pollutants in the Ambient Air. It comes with an Air sampler where the sample air is scrubbed in a solution specific to the pollutant. The pollutant gas dissolves in the gas specific chemical and is further processed to produce a colored dye. The instrument measures the absorbance of light passed through this colored dye and relates it to the concentration of pollutants in ppb levels.  
With datalogging included as standard and the presence of a USB interface, the user can easily transfer the stored data along with time and date to a computer. 

Read more
Quick view

Simple Sampling Probe

Simple Sampling Probe

The Uniphos Simple Sampling probe is tailor made for situations where temperature of the stack is not high, and condensation does not happen while extracting the sample from the stack. The dust filter present in the probe ensures that no dust is passed through the line.  User-Settable purging facility enables automatic purging of the probe at pre-defined time intervals.  

Read more
Quick view