C10 DA Valve
The 3/4 x 16 UN C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in stainless steel.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
3/4″ x 16 UN
Outlet Connection:
5/18″ UNF-F
Material:
Stainless Steel
Warranty:
1 year
Related products
Trigger Fixed Flow Regulator
The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders.
The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
6mm Straight tube
Material:
Brass
Warranty:
1 year
CGA 165 Valve
CGA 600 Adapter
The CGA 600 Adapter is used on non-reactive gas cylinders for connecting Fixed Flow regulators, Demand Flow Regulators, Trigger Regulators, Push button Regulators and Multi Flow Regulators.
Adapts the any Litre-bottle male thread connection (CGA600) to the any litre-bottle/regulator female thread connection (C10).
SPECIFICATIONS
Inlet Pressure:
90 bar max
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
1”/20 UNEF-F
Material:
Brass or Stainless Steel
Warranty:
1 Year
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
Push Lever Fixed Flow Regulator
The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass & Stainless Steel
Warranty:
1 year
Duo Fixed Flow Regulator
The Duo flow regulator is designed to have a button on top for temporary release of gas if the button is pressed down to prevent accidental loss of gas and a rotating cap for situations where continuous flow of gas is required and the regulator is needed to be in on position.
Both mechanisms are easy to use for outlet flow rates of 0.5 L/Mn and 1.0 L/Mn
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection & Taper Shank adaptable to Polyurethane tube.
Material:
Brass
Warranty:
1 year
Rupture Disk C10 Valve
This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder.
The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure:
90 bar
Inlet Connection:
1/14” UNS
Outlet Connection:
5/18” UNF-F
Material:
Stainless Steel
Warranty:
1 year
Hybrid Fixed Flow Regulator
The Hybrid type Fixed flow regulator comes with unique design that can be used with disposable cylinders filled with reactive gases.
It comprises of an aluminium cap and stainless-steel body which can be used for corrosive gasses. The aluminium cap contributes to reduction in weight and size of the regulator.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.3 to 7 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed connection
Material:
Stainless Steel (Body) & Aluminium (Cap)
Warranty:
1 year