Solo 460 – Cordless Heat Detector Tester – Head Unit Only
The head unit only of the Solo 461 cordless heat detector tester is ideal for instances where you may have more than one technician working on site, or simply to replace a tester that has come to the end of its life. Using Cross Air Technology where heated air is blown across the cup, the Solo 460 cordless heat detector tester head unit provides rapid detector activation without the need for wiring. Replacement head unit only for the Solo 461 Cordless Heat Detector Tester Kit No wiring required - powered by battery batons (not included) Designed for use on fixed temperature, rate-of-rise and combination detectors to up 90 °C/194 °F (not Sabre) Lightweight and easy to use Test cup design allows clear view of the detector LED Uses Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor Suitable for use at height, low levels and angles Suitable for use in conjunction with Solo telescopic access poles Provides rapid detector activation Please note: this listing is for the tester head unit ONLY. For the full kit including battery batons and charger, please see Solo 461 Cordless Heat Detector Tester Kit.
Solo 365 Smoke Detector Tester Head & Key Components Kit
The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time.
15% lighter than the Solo 330
Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles
Slimline design enables access to awkwardly positioned detectors
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Delayed start and manual purge options for ASD and non-standard detector testing
Battery, cartridge, and generator status LEDs
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Auto-LED torch for testing in dark areas
Test/clear cycle status indicators located at the bottom of the head for clear line of sight
Proximity sensor automatically starts test and clear cycles for quicker testing
Controlled smoke delivery for less wastage and more efficient testing
Automatically turns off after 10 minutes of inactivity to extend battery life
Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.
Solo 461 – Cordless Heat Detector Tester Kit
The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation.
Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor
UL and ULC listed
No trailing cables - fully complies with Health and Safety at Work regulations
Battery operated - supplied with two battery batons
Provides rapid detector activation
Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre)
Visual low battery indicator
Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter)
Quiet fan motor for discreet operation
Lightweight and easy to use
Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately)
Suitable for use at angles
1 year manufacturer's warranty
Solo 908 – 4m Test Kit with Solo 365
The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit.
Slimline design allows easy access to awkwardly positioned detectors
Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres)
Automatic LED torch for testing in dark areas
Compatible with standard Solo poles including the 100 and 101
Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Solo 811 & 812 – Smoke Detector Test and Removal Kits
Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag.
Ensures technicians comply with the Safe Working at Height Regulations 2005
Negates the need for ladders or expensive scaffolding
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 Protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height)
Smoke dispenser is suitable for detectors up to 100mm/4" in diameter
Removal tool creates various size combinations for the majority of detectors
Non-conductive glass fibre access poles
Allows "functional" testing to be carried out
Testifire 1000 Smoke/Heat Detector Tester – Head Unit
Testifire products offer multi-sensor testing capabilities. The Testifire 1000-001 replacement smoke/heat detector tester can be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors that are out of reach. The unit is supplied with the required smoke capsule.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
Capable of testing both heat and smoke detectors
User friendly programmable interface
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke generated as needed from capsule
Increased efficiency offers potential time saving of 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 1002 Smoke/Heat Detector Testing Kit.
Testifire 1002 Smoke/Heat Detector Testing Kit
The Testifire 1002 Smoke/Heat detector testing kit offers amazing time saving benefits for those providing commercial detector testing services. With automated test initiation and bespoke, programmable test cycles, the Testifire 1002 kit offers substantial long term time and cost saving benefits. This kit also features a clearing function to remove any residual smoke or heat from the sensor quickly, reducing the time for each individual sensor test.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two Solo battery batons
Solo 727 fast charger
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains
The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor.
Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors
Allows "functional" testing to be carried out
Enables a working height of 6 metres
Kit includes:
Solo 4.5m telescopic access pole
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 220/240V mains powered heat detector tester
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic pole has a non-conductive glass fibre construction
Ensures compliance with the Safe Working at Height Regulations 2005
Single telescopic pole suits all three equipment head tools
Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit
The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
User friendly programmable interface
Capable of testing smoke, heat and carbon monoxide (CO) detectors
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke and CO generated as needed from capsules
Increased efficiency offers a potential time saving of up to 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
Solo 911 – 6m Test and Removal Kit with Solo 365
The Solo 911 smoke detector testing kit allows engineers to reach heights of up to 6m without the need for ladders, harnesses, or other equipment that may need special training and risk assessments. Using the new Solo 365 testing system there is no longer a need to store or transport pressurised aerosols while the battery has also been changed to a much smaller and lighter design that charges via MicroUSB. These improvements make carrying spare batteries and test smoke much easier, especially with the Solo 610 protective bag, while the addition of the Solo 200 detector removal tool means that this kit is ideal for any fire alarm engineer.
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Includes a Solo 100 telescopic access pole
Also compatible with other Solo poles including the 108 and 101
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Slimline design enables access to awkwardly positioned detectors
Auto-LED torch for testing in dark areas
Also suitable for aspirating smoke detection systems with the Solo 372 ASD adaptor (sold separately)
Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit
This product has been designed to revolutionise commercial fire alarm testing. The Testifire 2002 kit allows trained personnel to carry out "functional" testing on remote smoke, heat and carbon monoxide (CO) sensors without the need for scaffolding, harnesses or ladders. This presents the obvious safety benefits, but also allows users to save an estimated 45 minutes per day by removing the need to set up platforms etc. The device creates the necessary stimuli as needed, meaning there is zero waste, and also offers a clearing function meaning you can move on from having tested a device confident in the knowledge it is clear and ready to go.
Kit includes:
Testifire 2000 Smoke/Heat/CO detector tester
TS3 smoke capsule
TC3 carbon monoxide capsule
Two solo battery batons
Solo 727 fast charger
User friendly programmable interface
Automated infra-red test initiation
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed- both smoke and CO created on demand
Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless
Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely.
Eliminates the need for ladders and expensive scaffolding
Ensures compliance with the Safe Working at Height Regulations 2005
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 461 cordless heat detector test set
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height)
Non-conductive telescopic access and extension poles
Suitable for the majority of modern smoke and heat detectors
Detectors can be accessed out of normal reach
No trailing cables - complies with the Health and Safety at Work regulations
Smoke dispenser introduces simulated smoke to the detector
Heat detector tester directs hot air into the sensor
Allows "functional" testing to be carried out