Mini Flow C10 Valve
It is used with the 20 litre mini gas cylinder.
Designed with a simple on/off valve the gas flow is regulated through a Rotameter.
SPECIFICATIONS
Inlet Pressure:
35 bar
Outlet Flow:
0 to 1 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or CGA 600 or Aerosol
Outlet Connection:
Barbed Outlet
Material:
Brass
Warranty:
1 year
Related products
CGA 600 Valve
Single Stage Regulator
Single-stage gas pressure regulators reduce cylinder pressure to delivery or outlet pressure in a single or one step. Its one of the safest means to reduce pressure and has large supply pressure effect.
The Regulator comes with gauge upto 315 Bar and bottom connection made of stainless steel.
SPECIFICATIONS
Inlet Pressure:
150 bar max
Outlet Pressure:
0-2 bar max
Outlet Flow:
15 L/Mn
Inlet Connection:
1/4” NPT Female- Adaptor to C10 valve
Outlet Connection:
¼” NPT female or 1/8” NPT Female
Regulator Inlet Port:
¼” NPT Female – Adaptor to c10 valve or 1/8” NPT Female
Material:
Stainless Steel and Aluminium
Warranty:
1 year
C10 DA Valve
Combination Regulator
Combination Regulator is compatible with standard C10 connection refillable cylinders. The unique design of this regulator allows it to act like a valve and regulator when needed.
It consists of ON/OFF knob with pressure gauge to determine the cylinder volume and a gas refiling port on top on of the regulator.
SPECIFICATIONS
Inlet Pressure:
100 bar
Outlet Flow:
0.1 to 7 L/Mn
Inlet Connection:
1/14” UNS
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
Fixed Flow Regulator NPT
Fixed Flow Regulator is manufactured to give various fixed flow rates and is compatible with all gas cylinders with a NPT connection.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
1/4“ NPT F
Outlet Connection:
Barbed connection
Material:
Stainless Steel
Warranty:
1 year
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year
Multi Flow Regulator
Multi Flow regulator is a single stage piston style regulator. The regulator has 9 selectable flow settings. Used with corrosive and non-corrosive gases.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0 to 3 L/Mn, 0 to 5 L/Mn, 0 to 8 L/Mn, 0 to 15 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed or Compression fitting
Material:
Brass or Stainless Steel
Warranty:
1 year