Push Lever Fixed Flow Regulator
The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Barbed Outlet
Material:
Brass & Stainless Steel
Warranty:
1 year
Related products
CGA 165 Valve
Hybrid Compression Flow regulator
Hybrid Compression Flow Regulator is manufactured to give various fixed flow rates and compatible for all calibration needs.
Made with aluminium and Stainless Steel , this regulator is light and durable can be used with ¼” tubing at inlet.
Suitable for low ppm reactive gasses as all parts are made of Stainless Steel and ranges from 0.5 L/Mn to 25 L/Mn.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn to 25.0 L/Mn
Inlet Connection:
Compression Fitting for ¼ “ Tubing
Outlet Connection:
Barbed connection
Material:
Aluminium and Stainless Steel
Warranty:
1 year
Combination Regulator
Combination Regulator is compatible with standard C10 connection refillable cylinders. The unique design of this regulator allows it to act like a valve and regulator when needed.
It consists of ON/OFF knob with pressure gauge to determine the cylinder volume and a gas refiling port on top on of the regulator.
SPECIFICATIONS
Inlet Pressure:
100 bar
Outlet Flow:
0.1 to 7 L/Mn
Inlet Connection:
1/14” UNS
Outlet Connection:
Barbed Outlet
Material:
Aluminium
Warranty:
1 year
Bump Test Fixed Flow Regulator
Bump test is a functional test of a gas monitor.
This regulator is used for calibration and working of Bump test for known quantity gas.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
1/8” BSP or NPT-F
Material:
Brass
Warranty:
1 year
Septum Flow Valve
The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe.
This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure:
35 bar
Inlet Connection:
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection:
Septum Outlet
Material:
Brass
Warranty:
1 year
Push Button Fixed Flow Regulator
Push Button Regulator comes with a ON/OFF button on its top as preventive measure for accidental loss of gas and is mainly used for Bump Testing.
SPECIFICATIONS
Inlet Pressure:
70 bar
Outlet Flow:
0.5 L/Mn & 1.0 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M
Outlet Connection:
Taper Shank Adaptable to Polyurethane Tube
Material:
Brass & Stainless Steel
Warranty:
1 year
High Pressure Fixed Flow Regulator
It is compatible with all gas cylinders with standard C10 connections and is available in variety outlet flows and can be used with gas mixture in disposable cylinders.
SPECIFICATIONS
Inlet Pressure:
200 bar
Outlet Flow:
0.3 to 7 L/Mn at 4 bar pressure
Inlet Connection:
1/4“ NPT F for the high Pressure
Outlet Connection:
1/4“ NPT F for the high Pressure
Material:
Brass & Stainless Steel
Warranty:
1 year
Standard Demand Flow Regulator
Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn.
The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure:
70 bar or 200 bar
Outlet Flow:
0-3 L/Mn
Inlet Connection:
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection:
Barbed Outlet
Material:
Brass or Stainless Steel
Warranty:
1 year