The Toximeter III automatic detector tube pump makes the sampling process easier, allowing the user to preset the number of pump strokes.
| Substance | Ordering Code | Data Sheet |
| Kwik-Draw Deluxe detector tube pump | D5146762 |  |
| Gas-Tester II H | D5146760 | |
| Gas-Tester | D5140904 | |
| Uniphos Toximeter III | D5142708 | |
| Sampling line [4 m] | D5146705 | |
| Sampling line [15 m] | 10015366 | |
| Tip Breaker | D5085012 | |
| DT Rubber holder f. detector tubes | D4074058 |
The Uniphos KwikAlert is a compact single gas, diffusion based personal monitor designed to monitor the work environment for dangerous levels of Methyl Bromide gas. Equipped with a bright and easy to read OLED display, the gas concentration is continuously displayed, and its user settable audio and visual alarms alert the user of dangerous levels of gas. With data logging available as standard, monitoring TWA and STEL limits is a breeze.
The MBr KwikAlert gas monitor can detect MBr in the range of 0 to 200 ppm, making it an ideal tool to both check for leaks around the fumigation chamber, as well as monitor the environment for dangerous levels of MBr.
The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location. This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required. It can act as a controller and/or as a bridge between the detector and controller.
It comes with an industry-standard RS-485 MODBUS-RTU and 4-20 mA output to connect the controller as well as the detector. All settings can be configured using the supplied non-intrusive magnetic wand.
The KwikSense RD has numerous international certifications including ATEX, IECEx, SIL2, and INMETRO.
The Uniphos KwikSense Lite Transmitter offers users a high quality, low-cost solution to their gas monitoring needs. It can be installed in potentially explosive atmospheres, as the transmitter is housed in an explosion-proof (“Exd” Certified) enclosure.
KwikSense Lite comes with a pre-calibrated sensor for easy installation. It provides the user with industry-leading plug-n-play sensor technology for the gas of choice. This allows rapid field replacement of the sensor with a new pre-calibrated one, eliminating the need for field calibration. It comes with an Industry Standard 4-20 mA analog output.
The KwikSense Lite has numerous international certifications including ATEX & IECEx
The Uniphos KwikAlert is a compact single gas, diffusion based personal monitor designed to monitor the work environment for dangerous levels of Phosphine gas. Equipped with a bright and easy to read OLED display, the gas concentration is continuously displayed, and its user settable audio and visual alarms alert the user of dangerous levels of gas. With data logging available as standard, monitoring TWA and STEL limits is a breeze.
The Phosphine KwikAlert gas monitor can detect PH3 in the range of 0.01 to 20 ppm, making it an ideal tool to both check for leaks around the fumigation chamber, as well as monitor the environment for dangerous levels of PH3.
