The Uniphos ASP-40 pump is a light weight and rugged piston and barrel type of air sampling pump that creates a vacuum in the pump barrel causing it to draw an accurate volume of sample air through the connected gas detector tube. The integrated end-of-stroke indicator changes colour to indicate the completion of sampling. The Uniphos ASP-40 pump is easy to operate and is designed for use with the entire Uniphos gas detector tube range.
|Substance||Description||Ordering Code||Data Sheet|
|ASP-40||The Uniphos ASP-40 pump is a light weight and rugged piston and barrel type of air sampling pump||CF000769|
|Sampling line [4 m]||Sampling line 4 m with Tube Holder||CF001024|
|Sampling line [15 m]||Sampling line 15 m with Tube Holder||CF001025|
|Uniphos Tube Holder||Detector Tube Holder for Uniphos Detector Tubes||CF001026|
The Uniphos Peltier Cooled Probe is an advanced sample conditioning system to draw a gas sample from an emissions stack being monitored. Sample extraction and conditioning is an important part of all Continuous Emission Monitoring Systems (CEMS) and includes extracting the sample from the stack and maintaining the dew point of the sample at such a level that there is no condensation at any point until the concentration of the sample is measured. This ensures proper transport and measurement of sample concentrations.
The Peltier Cooled Probe is a unique product which is based on an advanced hot and dry extractive technique where the sample is extracted and conditioned on the stack and transported to the analyzer using a non-heated sampling tube at ambient temperature. It consists of a stack mountable system which includes a heated probe, a short, heated sampling line and a Peltier cooled sample conditioning module, all integrated in a single enclosure. Using a Peltier Cooled Probe reduces the length of the heated sampling line to less than half a meter, bringing down the operating cost many times.
The GasFinder3-OP is a field deployable Open-Path Tunable Diode Laser (OP-TDL) based gas analyzer system that is primarily used for:
This technology is also most commonly referred to as Open Path Gas Detection (OPGD) or Line of Sight (LOS).
This particular technology is ideal for detecting or monitoring for a number of different Toxic, Combustible, Hazardous, or Greenhouse Gases.
The Uniphos Fluorescence Based SO2 Stack Gas Analyzer is a reliable instrument with high sensitivity and selectivity which is designed and developed to meet customer’s requirement for measuring the concentration of SO2 in PPM levels. Specific optical filters in the fluorescence cell in addition to moisture and hydrocarbon scrubbing systems ensures removal of any interferences making the analyzer highly specific for SO2 detection.
The optical excitation of SO2 molecules results in fluorescence in the wavelength region typically between 240-420 nm and the fluorescence intensity is related to SO2 concentration.
The Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Auto/ Remote calibration. The analyzer comes with built in diagnostics and internal memory which can store the test results along with date and time.
Total Cyanide in effluent water refers to the sum of all cyanide-containing compounds, including free/ weak acid as well as dissociable and strong metal cyanide complexes.
The Uniphos online Cyanide analyzer is a reliable, fully automatic analyzer designed to measure the total cyanide of waste / effluent water samples by an ASTM 7511-09 method. The ASTM 7511-09 method involves acid digestion with UV irradiation and determination of total cyanide by amperometric method. The amperometric technique used is demonstrated to be free of analytical interferences and eliminates the use of hazardous reagents. No human intervention is required during the measurement as the analyzer is completely automated.
The inbuilt diagnostics feature gives an alarm if there are any faulty components or if the reagent level goes below the minimum level. Equipped with a next generation touchscreen HMI for display and programming, the analyzer provides a variety of data communication options such as RS-485 MODBUS and industry standard 4-20 mA analog output
The TDLAS (Tunable Diode Laser Absorption Spectroscopy) technique in combination with WMS (wavelength modulation spectroscopy) is highly sensitive and specific method for detection of gases and is an excellent technique for concentration measurement of gaseous species in scientific as well as industrial applications. Uniphos TDLAS based gas analyzer are exceptionally reliable for trace level detection of atmospheric pollutants like HF, HCl, NH3 etc. Our TDLAS based analyser provides an accurate and real time measurements of these atmospheric pollutants from ppm levels to percentage levels.
All diatomic and polyatomic molecules have one or several vibrational modes which can absorb radiation and give rise to a unique absorption spectrum in the infrared region with several absorption lines. Taking any one of the IR absorption lines of the target gas as its finger print, an instrument can be built for measurement of target gas concentration. Infrared technique is endowed with very high specificity when a right choice of the vibrational frequency of the target molecule is made. This technique is cost effective and reliable for measurement of gas concentration in parts per million range.
The Uniphos NDIR Stack Gas Analyzer are endowed with specificity and have adequate sensitivity for the detection of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks. The in-built powerful pump enables the analyzer to draw the sample from stack. Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Remote calibration. This PLC based analyser incorporates all desired features which makes it user-friendly and fail safe.