Solo 365 Smoke Detector Tester Head & Key Components Kit
The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time.
15% lighter than the Solo 330
Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles
Slimline design enables access to awkwardly positioned detectors
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Delayed start and manual purge options for ASD and non-standard detector testing
Battery, cartridge, and generator status LEDs
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Auto-LED torch for testing in dark areas
Test/clear cycle status indicators located at the bottom of the head for clear line of sight
Proximity sensor automatically starts test and clear cycles for quicker testing
Controlled smoke delivery for less wastage and more efficient testing
Automatically turns off after 10 minutes of inactivity to extend battery life
Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.
Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs
Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required.
Allows the access of smoke detectors out of normal reach
Non-conductive glass fibre extension and telescopic access poles
Smoke dispenser introduces simulated smoke to the detector
Pack includes:
Solo A10 smoke detector tester (150ml canister)
Solo 330 smoke dispenser
Telescopic access or extension pole (three lengths available)
Three access poles to choose from:
Solo 101 - 1.13m extension pole (2.5m working height)
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Suitable for detectors up to 100mm/4" in diameter
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Testifire 1000 Smoke/Heat Detector Tester – Head Unit
Testifire products offer multi-sensor testing capabilities. The Testifire 1000-001 replacement smoke/heat detector tester can be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors that are out of reach. The unit is supplied with the required smoke capsule.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
Capable of testing both heat and smoke detectors
User friendly programmable interface
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke generated as needed from capsule
Increased efficiency offers potential time saving of 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 1002 Smoke/Heat Detector Testing Kit.
Solo 365 Adaptor for ASD Systems
Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment.
No-fuss functional testing of aspirating smoke detection systems
Designed for use only with Solo 365 equipment
Quick and easy to fit while on the job
Small and lightweight – can be kept on hand at all times
Controlled smoke delivery for less wastage and more efficient testing
Allows testing of both ASD and point detectors with a single, portable device
Works with the Solo 365's delayed start and manual purge options
Slimline design enables access to awkwardly positioned detectors
Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.
Solo 332 – Large Smoke Dispenser
Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height.
Allows "functional" smoke detector testing to be carried out
UL listed
Robust and lightweight
Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter
Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery
Clear cup ensures 360 degree view of the detector
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not included)
Can be used with the Solo telescopic and extension access poles for safe testing at heights
Suitable for use when testing domestic smoke and CO alarms
Testifire 1002 Smoke/Heat Detector Testing Kit
The Testifire 1002 Smoke/Heat detector testing kit offers amazing time saving benefits for those providing commercial detector testing services. With automated test initiation and bespoke, programmable test cycles, the Testifire 1002 kit offers substantial long term time and cost saving benefits. This kit also features a clearing function to remove any residual smoke or heat from the sensor quickly, reducing the time for each individual sensor test.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two Solo battery batons
Solo 727 fast charger
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Solo 365 Spare Battery Pack
The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site.
Designed for use only with Solo 365 equipment
Available individually and in packs of 4
Small, lightweight design makes carrying spares far easier than traditional Solo battery batons
High-capacity Lithium Ion technology
Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit
Test more detectors in less time by carrying spares instead of going back to the van
Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains
The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor.
Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors
Allows "functional" testing to be carried out
Enables a working height of 6 metres
Kit includes:
Solo 4.5m telescopic access pole
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 220/240V mains powered heat detector tester
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic pole has a non-conductive glass fibre construction
Ensures compliance with the Safe Working at Height Regulations 2005
Single telescopic pole suits all three equipment head tools
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly.
Designed for use with the Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Negates the need for power cables, removing a potential trip hazard
Supplied singularly
New improved 3.0Ah model
Rechargeable via the smart fast battery charger (not included)
Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Solo 365 Field Service Pack
Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order.
Designed for use only with Solo 365 equipment
Easy to install, field-replaceable design – no service requirement
Test more detectors in less time by carrying spares instead of going back to the van
The field service pack contains:
1x Cup & Membrane
1x Smoke Generator
1x Lithium Ion Battery Pack
Small, lightweight component designs make carrying spares far easier
Reduced downtime due to damaged equipment
Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed
Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit
The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage.
Enables trained personnel to carry out "functional" testing on devices that are out of reach
User friendly programmable interface
Capable of testing smoke, heat and carbon monoxide (CO) detectors
Also suitable for aspirating smoke detector systems
Powered by Solo 770 battery batons (sold separately)
Ensures compliance with the Safe Working at Height Regulations 2005
Does not require stored pressure cylinders - smoke and CO generated as needed from capsules
Increased efficiency offers a potential time saving of up to 45 minutes per day for users
Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
