- Range: 0 – 1000 ppm
- Resolution: 1 ppm
- 20×4 OLED display & inbuilt air sampling pump; can draw sample from 30m
- Continuous as well as Batch sampling provision
- Data logging facility with informations like Gas_conc., Warehouse no., Silo no., Date & Time
- USB interface
- GUI for data downloading, sorting & report generation
- Soft power start – to avoid accidental ON/OFF
- Gas Name: Phosphine
- Range: 0-2000 ppm
- Resolution: 1 ppm
- Sensors: Electrochemical sensor
- Accuracy: Inherently +/- 2% FS (but also depends on the calibration gas & method)
- Drift: less than 2% of the signal per month at constant temperature and pressure.
- Sampling modes: Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling.
- Alarm set point: One user settable alarm set point (for low range detectors)
- Data Storage: Provision to store test records with gas conc. and alarm set points along with date and time.
- Power source: 7.4V mAh Li-ion rechargeable battery pack
- Inbuilt Pump Flow Rate: 400 to 800 ml/min
- Power: 3.5V DC, 60 mA
- Runtime: About 6 – 8 hours
- Data Transfer: USB communication for data transfer from instrument to computer
- Function keys: UP, DOWN, SET & ENTER
- Operating temperature: -0 °C to 40 °C
- Display: Large 20 x 4 Alphanumeric OLED
- Instrument Enclosure: High Impact ABS
- Size: Height = 205 mm Depth = 38 mm Width1 = 108 mm Width2 = 65 mm
- Weight: 500 g
- Accessories: Dust filter, battery charger, data downloading cable and outlet coupler.