Click to enlarge
Previous product
KRL 70
Back to products
Next product
Uniphos Online COD Analyzer (Potentiometric Method)
Uniphos

Uniphos Online Ammoniacal Nitrogen Analyzer

Uniphos Online Ammoniacal Nitrogen Analyzer

The presence of Nitrogen in the form of Ammonium/ Ammonia is termed as Ammoniacal Nitrogen in the influent/ sample 

The Uniphos online Ammoniacal Nitrogen analyzer is an accurate, stable and fully automatic analyzer designed to measure Ammoniacal Nitrogen of process / surface water samples using an electrochemical sensor. No human intervention is required during the measurement as the analyzer is completely automated.
The inbuilt diagnostics feature provides an alarm if there are any faulty components or if the reagent falls below the minimum level. Equipped with a next generation touchscreen HMI for display and programming, the analyzer provides a variety of data communication options such as RS-485 MODBUS and industry standard 4-20 mA analog output 

SKU: c749b2610ff9 Category: Tag:
Description
Features
  • Simple in operation
  • No sample pre treatment
  • Only two Reagents with very less consumption per analysis
  • A fully automated system with a industry accredited Program Logic controller (PLC) and Human Machine Interface (HMI)
  • Built in diagnostic features for reagent level alarm and the component malfunctions
  • Data communication compatible with required SPCB/CPCB norms
Specification
  • Measurement Technique: Electrochemical Sensing
  • Measuring Range: 10 – 500 ppm
  • Measurement Accuracy: ±10 ppm for 10-100 ppm
                                               ±10% of reading for ≥100 – 500 ppm
  • Calibration: Single point calibration
  • Sample injection: Automatic
  • Sampling interval: User Programmable
  • Analysis time: 15 min
  • Display: TFT LCD touch panel
  • Reagents: NaOH, H2SO4, distilled water.
  • Power: 230 V AC/ 60 Hz
  • Data Communication: RS-485 & 4-20 mA
  • Instrument dimensions: H=1200mm, L=400mm, B=600mm
  • Instrument weight: 65 kgs

Related products

Close

TPF Probe

TPF Probe

The emission of pollutants such as CO, CO2, NO, NO2, total NOx, SO2 etc. from stacks are often measured and reported for regulatory compliance purposes on a mass flow rate basis. Mass flow rates are typically calculated and reported in units of lbs or kg per hour and tons per year for these pollutants. The pollutant mass flow rate is a function of the pollutant concentration of the stack gas, the stack size & shape, and the stack gas velocity. 

The Uniphos Integrated Temperature, Pressure and Flow Probe is meant for continuous and real time measurement of Temperature, Pressure and velocity of gases in industrial stacks. All the three sensors are integrated on a single flange and can easily be mounted on the stack without any hassle. 

Close

Uniphos Envirotrack

Uniphos Envirotrack

The Uniphos Envirotrack is microprocessor based portable instrument custom made to measure the pollutants in the Ambient Air. It comes with an Air sampler where the sample air is scrubbed in a solution specific to the pollutant. The pollutant gas dissolves in the gas specific chemical and is further processed to produce a colored dye. The instrument measures the absorbance of light passed through this colored dye and relates it to the concentration of pollutants in ppb levels.  
With datalogging included as standard and the presence of a USB interface, the user can easily transfer the stored data along with time and date to a computer. 

Close

Simple Sampling Probe

Simple Sampling Probe

The Uniphos Simple Sampling probe is tailor made for situations where temperature of the stack is not high, and condensation does not happen while extracting the sample from the stack. The dust filter present in the probe ensures that no dust is passed through the line.  User-Settable purging facility enables automatic purging of the probe at pre-defined time intervals.  

Close

Fluorescence Based SO2 Stack Gas Analyzer

Fluorescence Based SO2 Stack Gas Analyzer

The Uniphos Fluorescence Based SO2 Stack Gas Analyzer is a reliable instrument with high sensitivity and selectivity which is designed and developed to meet customer’s requirement for measuring the concentration of SO2 in PPM levels. Specific optical filters in the fluorescence cell in addition to moisture and hydrocarbon scrubbing systems ensures removal of any interferences making the analyzer highly specific for SO2 detection.  

The optical excitation of SO2 molecules results in fluorescence in the wavelength region typically between 240-420 nm and the fluorescence intensity is related to SO2 concentration.  

The Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Auto/ Remote calibration. The analyzer comes with built in diagnostics and internal memory which can store the test results along with date and time. 

Close

TDLAS Based Gas Analyser

TDLAS Based Gas Analyser

The TDLAS (Tunable Diode Laser Absorption Spectroscopy) technique in combination with WMS (wavelength modulation spectroscopy) is highly sensitive and specific method for detection of gases and is an excellent technique for concentration measurement of gaseous species in scientific as well as industrial applications. Uniphos TDLAS based gas analyzer are exceptionally reliable for trace level detection of atmospheric pollutants like HF, HCl, NH3 etc. Our TDLAS based analyser provides an accurate and real time measurements of these atmospheric pollutants from ppm levels to percentage levels.   

Close

Uniphos Oxygen Analyzer

Uniphos Oxygen Analyzer

The Uniphos Oxygen Analyzer with Zirconia Oxygen sensor is a versatile analyzer offering oxygen concentration measurement in industrial stacks operating at high temperature and humidity. The sensor employs a well proven Zirconium Dioxide based element which gives a highly accurate linear output. The Analyzer is equipped with the latest embedded and IOT technologies which allows Auto/ Remote calibration as well as calibration with fresh air.  

Close

FumiSense Pro PH3 – Lo

FumiSense Pro PH3 - Lo

FumiSense Pro-Lo is a handheld Phosphine monitor for monitoring phosphine levels outside the fumigated stack/ silo/ ship to check for leaks and to ensure the level of PH3 is less than the TLV. Equipped with an inbuilt air sampling pump and with the ability to measure PH3 up to 20 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.

Close

Uniphos Online COD Analyzer (Potentiometric Method)

Uniphos Online COD Analyzer
(Potentiometric Method)

Chemical Oxygen demand is defined as the amount of oxygen required for the oxidation of all the organic compounds present in a water sample.  

The Uniphos online COD analyzer is a programmable, fully automatic analyzer which measures COD of waste / effluent water samples using a direct method of analysis. This direct method involves oxidation of sample by potassium dichromate and measurement by potentiometric titration. No human intervention is required during the measurement, as the analyzer is completely automated.
The inbuilt diagnostics feature gives an alarm if there are any faulty components or if the reagent level goes below the minimum level. Equipped with a next generation touchscreen HMI for display and programming, the analyzer provides a variety of data communication options such as RS-485 MODBUS and industry standard 4-20 mA analog output