Solo 610 – Protective Storage Bag
This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes.
Designed for recharging Solo 770 battery batons
Provides power for Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Offers a rapid charging time of just 90 minutes
Supplied with 12V and mains connections
Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly.
Designed for use with the Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Negates the need for power cables, removing a potential trip hazard
Supplied singularly
New improved 3.0Ah model
Rechargeable via the smart fast battery charger (not included)
Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Solo 811 & 812 – Smoke Detector Test and Removal Kits
Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag.
Ensures technicians comply with the Safe Working at Height Regulations 2005
Negates the need for ladders or expensive scaffolding
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 Protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height)
Smoke dispenser is suitable for detectors up to 100mm/4" in diameter
Removal tool creates various size combinations for the majority of detectors
Non-conductive glass fibre access poles
Allows "functional" testing to be carried out
Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains
The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor.
Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors
Allows "functional" testing to be carried out
Enables a working height of 6 metres
Kit includes:
Solo 4.5m telescopic access pole
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 220/240V mains powered heat detector tester
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic pole has a non-conductive glass fibre construction
Ensures compliance with the Safe Working at Height Regulations 2005
Single telescopic pole suits all three equipment head tools
Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless
Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely.
Eliminates the need for ladders and expensive scaffolding
Ensures compliance with the Safe Working at Height Regulations 2005
Kit includes:
Solo 200 universal removal tool
Solo 330 smoke dispenser
Solo 461 cordless heat detector test set
Solo A10 smoke detector tester spray (150ml canister)
Solo 610 protective carry/storage bag
Telescopic access pole(s) - depending on working height required
Two working heights to choose from:
1 x 4.5m telescopic pole (6m working height)
1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height)
Non-conductive telescopic access and extension poles
Suitable for the majority of modern smoke and heat detectors
Detectors can be accessed out of normal reach
No trailing cables - complies with the Health and Safety at Work regulations
Smoke dispenser introduces simulated smoke to the detector
Heat detector tester directs hot air into the sensor
Allows "functional" testing to be carried out
Solo 908 – 4m Test Kit with Solo 365
The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit.
Slimline design allows easy access to awkwardly positioned detectors
Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres)
Automatic LED torch for testing in dark areas
Compatible with standard Solo poles including the 100 and 101
Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Solo 911 – 6m Test and Removal Kit with Solo 365
The Solo 911 smoke detector testing kit allows engineers to reach heights of up to 6m without the need for ladders, harnesses, or other equipment that may need special training and risk assessments. Using the new Solo 365 testing system there is no longer a need to store or transport pressurised aerosols while the battery has also been changed to a much smaller and lighter design that charges via MicroUSB. These improvements make carrying spare batteries and test smoke much easier, especially with the Solo 610 protective bag, while the addition of the Solo 200 detector removal tool means that this kit is ideal for any fire alarm engineer.
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Includes a Solo 100 telescopic access pole
Also compatible with other Solo poles including the 108 and 101
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Slimline design enables access to awkwardly positioned detectors
Auto-LED torch for testing in dark areas
Also suitable for aspirating smoke detection systems with the Solo 372 ASD adaptor (sold separately)
Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed