Single Port FumiTrack

The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Hi and / or Lo concentration Phosphine during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process. 

Features

Fumigant Gases available: PH₃ (2000 or 5000 ppm)
Programmable monitoring intervals 
Cloud connectivity via GSM telemetry 
GPS connectivity – Location Tagging 
Camera connectivity for real time monitoring (optional)

Specification

Gas Name: Phosphine
Concentration range: 0 – 2000 ppm
Resolution: 1 ppm
Response Time (T90): Typically, less than 30 seconds after Establishment of the gas concentration in the sensor hood.
Accuracy: Inherently ± 2% (depends on the accuracy of the calibrating gas & sampling system)
Operating Temperature: 0^o to +45^oC, 32^o to 113^oF
Operating pressure Ambient: ± 10%
Gas Sampling: Sample Draw Type (with inbuilt pump).
Sampling Time: User settable
Purge Time: User settable
Display: State of art PLC & HMI based instrument
Data Logging Function: USB storage
Power Supply: 110 – 230 V AC/110 V AC, 50 60Hz Hz