Uniphos TSS probe with Controller

The Uniphos TSS probe utilizes optical spectroscopic technique to determine the presence of suspended solids in Industrial wastewater, surface water, etc. Utilizing an IR light source and IR detector to determine the TSS, as well as a solenoid valve for auto purging/ cleaning the sensor, the instrument provides an accurate and affordable solution for TSS monitoring in wastewater.

Equipped with a next generation touchscreen HMI controller for display and programming the unit, the probe provides a variety of data communication options such as RS-485 MODBUS and industry standard 4-20 mA analog output.

Features

Automatic cleaning of probe with high-pressure compressed air provides higher reliability than the mechanical blade
No reagents
Low operating cost
No secondary pollution
Fast response, suitable for online real time measurements

Specification

Detection Principle: Optical Spectroscopic (TSS: 860nm)
Range: 0-1000 NTU
Accuracy: ± 10% of the reading
Zero Drift: < 1% FS
Response Time: 10 seconds
Calibration: Calibration with Formazine standard for TSS
Power Requirement: Probe – 24VDC  Controller – 230V AC/50 Hz
Data Communication: RS 485(MODBUS-RTU Protocol) & 4-20 mA
Max. Load Resistance: 500Ω on 4-20mA O/P
Display: 4.3” TFT with touchscreen
Body Material: SS 316
Operating Temp: 5-45^o Celsius
Dimensions: Probe – Diameter: 90mm, Height: 320mm

Weight: Probe: 2.5kg Approx.  Controller: 3.5Kg Approx
Cable Length: 10 meters

Uniphos TSS probe with Controller