3 in 1 sensor: absolute pressure, temperature and humidity in the room Modbus-RTU, Ethernet or M-Bus interface Alarm relay – limit value adjustable via buttons (max 60 VDC, 0.5 A) Optional: 2 x 4…20 mA analogue outputs, 2 x alarm relays, e.g., for dew point and temperature
IAC 500 sensor for measuring ambient conditions
IAC 500– Measures ambient conditions in the room – absolute pressure, room temperature, humidity.
The delivery rate of compressors depends on the intake air.
The installation site and the climatic conditions must already be taken into account when designing compressed air stations.
| Brand |
CS Instruments |
|---|
Description
Related products
Leak detector with camera LD 500/510
The new leak meters LD 500/510 with integrated camera and leakage calculation are ideal measuring instruments which help to find and document even smallest leakages (0.1 l/min corresponds to approx. 1 € p. a.) easily even in far distances. LD 510 is the worldwide first leak meter with an additional freely assignable sensor input for all CS sensors. In addition to the leakage measurement and detection also all necessary measurements with regards to dew point, flow, pressure, and temperature ... can be carried out.
VA 500 – Flow meter for compressed air and gases
Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system. With our VA500 it is possible to monitor your consumption and analyze your leakage flows with just one measuring device. Due to its design, it is also ideal for mobile measurements.
DP 400 mobile – Mobile Dew Point Measurement with Pressure Sensor
For measurement of all humidity parameters under pressure up to 16 bar. The portable dew point meter with integrated, rechargeable battery has been developed especially for the eld use. Besides a highly precise dew point sensor the device also contains a precise pressure sensor up to 16 bar. So in addition to the dew point in °Ctd, the temperature in °C and the line pressure in bar also further moisture parameters (% RH, mg/m3, g/m3) as well as pressure-dependent measuring values (g/kg, ppm v/v, atm. dew point °C) can be calculated.
LeakCam 600 – all relevant leakages at a glance
The LeakCam 600 precisely detects compressed air leaks and leaks in compressed gases - even in noisy industrial production environments. Equipped with 64 ultrasonic MEMS microphones and the Power Beam Forming algorithm, it visualises multiple leakages simultaneously and enables them to be located quickly from a great distance. This saves you time when searching for leaks, reduces energy costs and increases the efficiency of maintenance.
CS Leak Reporter V2 – reporting software for LD 500/510 and LC 600
After you have imported the leakage data documented with the LD 500 or LD 510 into the "CS Leak Reporter V2" desktop software, you can create automated leakage reports on your computer with just a few clicks. This saves you a lot of time and effort instead of manually noting, sorting, and visualizing the data. This saves you a lot of time since there is no need to manually note, sort and visualize the data. With the report, you can show the operator of the compressed air system or the department manager, the company's energy manager, or ISO 50.001 auditor which leaks have been repaired and by how much you have reduced the loss of compressed air in your company. The report shows the savings in energy costs, e.g., €, electrical energy in kWh and emissions in tons of CO2 each year.