ECOGRIP MITAR LeMan Cut 5
ECOGRIP MITAR HIBERNIA CUT 5
The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”.
ECOMASTER PLUS F ESD
The cut protection glove ECOMASTER PLUS F ESD by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / span>
The fine glove made of micro HPPE fiber with polyamide, steel and basalt is certified according to EN 388: 2016 (4 X 4 2 F) and has a very high level of cut protection (level F) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling drier and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the steel fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER PLUS E ESD
The cut protection glove ECOMASTER PLUS E ESD by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and steel is certified according to EN 388: 2016 (4 X 4 2 E) and has a very high cut protection (Level E) according to EN 13997.
The ECOMASTER ® ½ immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Through The steel fibers in the knitted fabric make the glove touchscreen capable and also receive electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER PLUS C ESD
The cut protection glove ECOMASTER PLUS C ESD by W + R INDUSTRY is cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and carbon is certified according to EN 388: 2016 (4 X 4 3 C) and has a medium cut protection (Level C) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling dry and wet Parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the carbon fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOGRIP MANDUR W
The cut protection glove MANDUR W by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The very fine glove made of HPPE, polyester and glass is certified according to EN 388: 2016 (4 X 4 2 C) and h at a good cut protection (level C) according to EN 13997.
The ECOGRIP ® ¾ Double dip made of blue and sanded nitrile is very suitable for handling dry, wet and oily parts. The coating is oil and liquid tight.
ECOGRIP VULCAN C
The cut protection glove MERKUR
The fine glove made of HPPE fiber with steel and carbon is certified according to EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (Level D) according to EN 13997.
The ECOGRIP ® ½ immersion made of sanded nitrile is very suitable for handling wet, dry and oiled parts. The coating is liquid-repellent and very breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
ECOGRIP MITAR
The cut protection glove MITAR by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and Fiber optic i st certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
ECOMASTER VELOX ESD
The very fine ESD protective glove ECOMASTER VELOX ESD by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½- Eco-polymer immersion is very suitable good for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2003 (4 1 2 1).
The glove has electrostatic properties (ESD) through additional carbon fibers in the knitted fabric. These electrostatic properties have been tested and confirmed by the Saxon Textile Research Institute (STFI) according to EN 16350: 2014.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
ECOGRIP MITAR D
The cut protection glove MITAR D by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The dots made of black nitrile are very suitable for handling sensitive and small parts.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ECOGRIP MITAR S
ECOGRIP MITAR W
The cut protection glove MITAR W by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove made of HPPE and fiber optics & nbsp ; is certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ¾ two-layer immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
ECOGRIP MITAR WB
The cut protection glove MITAR WB by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove made of HPPE and glass fiber is certified according to EN 388: 2016 (4 X 4 4 D) and has a ho hen cut protection (Level D) according to EN 13997.
The ECOGRIP ® ½ immersion made of blue nitrile is very suitable for handling oily parts. The coating is oil- and liquid-tight and breathable.
ECOGRIP NOVAS
The assembly glove NOVAS by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
< p class = "cs95E872D0">The ½-immersion made of nitrile is well suited for handling wet and dry ner parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of nylon / spandex is certified according to EN 388: 2016 (3 1 2 1 x).
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good" .
ECOGRIP VULCAN
The cut protection glove VULCAN from W + R INDUSTRY is highly cut-resistant and fits perfectly to the hand thanks to its seamless 3D knitted fabric and offers a high level of comfort.
The fine hand shoe made from a Kevlar® stretch armor gold with steel core is certified according to EN 388: 2016 (4 5 3 2 E) and has a very high level of cut protection (level E) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is suitable very good for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
ECOMASTER PLUS 3
The cut protection glove ECOMASTER PLUS 3 by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The very fine glove one cut sten Micro-HPPE fiber with polyamide is certified according to EN 388: 2016 (4 X 4 1 B) and has a light cut protection (level B) according to EN 13997.
The ECOMASTER® ½-immersion made of eco-polymer is suitable very good for handling dry and wet parts. The coating is liquid-repellent and very breathable.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ECOMASTER PLUS 5
The cut protection glove ECOMASTER PLUS 5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. </ span>
The very fine glove from a r cut-resistant micro HPPE fiber with the finest poly / glass. is certified according to EN 388: 2016 (4 X 4 2 C) and has a medium cut protection (level C) according to EN 13997.
The ECOMASTER® ½-immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and very breathable.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>
ECOMASTER ULTIMO
The assembly glove ECOMASTER ULTIMO by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ½ immersion made of eco-polymer works very well for that Handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2003 (4 1 2 1).
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good “.
ECOMASTER ULTIMO D ESD
The ESD protective glove uh ECOMASTER ULTIMO ESD from W + R INDUSTRY has been tested in accordance with EN 13650, and thanks to its seamless 3D knitted fabric, it adapts perfectly to the Hand on and offers a very high level of comfort.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling electronic parts. The coating is liquid-repellent and yet breathable.
The assembly glove made of high-strength polyamide fiber with carbine is certified according to EN 388: 2016 (4 1 4 & nbsp ; 1 X).
The carbon fibers in the knitted fabric give the glove electrostatic properties ( ESD). These electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER VELOX
The very fine assembly glove ECOMASTER VELOX by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The ½ immersion from Eco -Polymer is very suitable ut for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2016 (4 1 2 1 X).
< span class = "cs1B16EEB5">
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good “.
ECOTAC ACER ESD
The ESD assembly glove ACER ESD by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The ½ immersion made of high-tech micro-nitrile foam is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of polyamide is certified according to EN 388: 2016 (4th 0 3 1 X).
Additional carbon fibers in the knitted fabric give the glove electrostatic properties (ESD). These electrostatic properties have been tested and confirmed according to EN 16350: 2014.
