ECOMASTER PLUS E ESD
The cut protection glove ECOMASTER PLUS E ESD by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and steel is certified according to EN 388: 2016 (4 X 4 2 E) and has a very high cut protection (Level E) according to EN 13997.
The ECOMASTER ® ½ immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Through The steel fibers in the knitted fabric make the glove touchscreen capable and also receive electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
Related products
CALOR II
The cut protection glove CALOR II from W + R INDUSTRY is highly cut-resistant and offers with its anatomical layered cut perfect wearing comfort.
D he glove is certified according to EN 388: 2016 (4 X 4 4 E).
In addition, the glove is according to EN 407: 2004 certified (4 1 3 X 4 X) and can be used according to DIN EN 12477: 2005 for TIG welding and also for heavy welding work (type A + B).
The palm of the CALOR is made of cow split leather, the backhand made of red cow split leather . The lining on the back of the hand and the palm is a Kevlar® tricot. The long cuff is made of soft but sturdy split leather and also has a pulse protection.
p>
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
CALOR
The cut protection glove CALOR from W + R INDUSTRY is highly cut-resistant and offers perfect comfort thanks to its anatomical layered cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 388: 2003 (4 5 4 4).
In addition, the glove is certified according to EN 407: 2004 (4 1 3 X 4 X) and can be used according to DIN EN 12477: 2005 can be used for TIG welding and also for heavy welding work (type A + B).
p>
The palm of the CALOR is made of split cowhide, the backhand made of red split cowhide. The lining on the back of the hand is made of flame-resistant cotton twill, the inside of the hand is made of Kevlar® tricot. The long cuff is made of soft but sturdy split leather and also has a pulse protection.
p>
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
BÜFFEL 7
The cut protection glove BÜFFEL 7 by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The palm of the BÜFFEL 7 is made of tactile nappa leather, the backhand of blue Sp old leather. The lining in the palm is made of cut-resistant Kevlar®. The long cuff is made of split leather and also has a pulse protection.
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
ALUSTAR II
The heat protection glove ALUSTAR 2 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 2 is made of red cow split leather, the backhand made of aluminum-coated split leather. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.
ANATOMIC ECO I
The work glove ANATOMIC ECO I by W + R INDUSTRY in Canadian style offers perfect wearing comfort thanks to its anatomical fit.
The palm and the knuckle protection are made of grain leather, the backhand is made of abrasion-resistant m and breathable cotton twill. The lining on the palm is made of soft polyester. The cotton cuff also has a pulse protection!
The glove is certified according to EN 388: 2003 (3 2 3 3).
< / span>
BLACK HAWK
The cut protection glove BLACK HAWK by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The glove is certified according to EN 388: 2016 (3 3 3 4 X).
The palm of the BLACK HAWK is made of turned goatskin, the backhand made of goat grain leather. The lining on the back of the hand is made of cotton interlock, the inside of the hand is made of Kevlar®. The short cuff is made of turned goatskin.