Solo 365 Smoke Detector Tester Head & Key Components Kit
The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an ‘auto-start’ proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time.
15% lighter than the Solo 330
Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles
Slimline design enables access to awkwardly positioned detectors
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Delayed start and manual purge options for ASD and non-standard detector testing
Battery, cartridge, and generator status LEDs
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Auto-LED torch for testing in dark areas
Test/clear cycle status indicators located at the bottom of the head for clear line of sight
Proximity sensor automatically starts test and clear cycles for quicker testing
Controlled smoke delivery for less wastage and more efficient testing
Automatically turns off after 10 minutes of inactivity to extend battery life
Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.
Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs
Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required.
Allows the access of smoke detectors out of normal reach
Non-conductive glass fibre extension and telescopic access poles
Smoke dispenser introduces simulated smoke to the detector
Pack includes:
Solo A10 smoke detector tester (150ml canister)
Solo 330 smoke dispenser
Telescopic access or extension pole (three lengths available)
Three access poles to choose from:
Solo 101 – 1.13m extension pole (2.5m working height)
Solo 108 – 2.2m telescopic pole (4m working height)
Solo 100 – 4.5m telescopic pole (6m working height)
Suitable for detectors up to 100mm/4″ in diameter
Ensures compliance with the Safe Working at Height Regulations 2005
Allows “functional” testing to be carried out
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height.
Cable length: 5m/16ft
Designed to help power Solo mains heat detector testers
Needed for applications where multiple telescopic or extension poles are used
Allows testing of heat detectors mounted at greater height
Testifire 6002 6m Smoke/Heat Detector Testing Kit
The Testifire 6002 smoke/heat detector testing kit offers an upgraded range of 6 metres which allows climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates an amazing time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6002 kit offers massive long term time and cost saving benefits for those carrying out “functional” testing on devices that are hard to reach by other means. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag as standard.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two solo battery batons
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed – stimuli created on demand
Solo 100 & 108 – Telescopic Access Poles
An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use.
Suitable for use with both Solo and Testifire branded products
Required for access to detectors out of normal reach
Lightweight non-conductive glass fibre construction
Optimum strength to weight ratio ensures minimum possible whip or bend at height
Easy to use locking mechanism
Available in two lengths:
Solo 108 – 2.2m telescopic pole (4m working height)
Solo 100 – 4.5m telescopic pole (6m working height)
Designed for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Regulations 2005
Allows “functional” testing to be carried out
Solo 461 – Cordless Heat Detector Tester Kit
The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation.
Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor
UL and ULC listed
No trailing cables – fully complies with Health and Safety at Work regulations
Battery operated – supplied with two battery batons
Provides rapid detector activation
Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre)
Visual low battery indicator
Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter)
Quiet fan motor for discreet operation
Lightweight and easy to use
Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately)
Suitable for use at angles
1 year manufacturer’s warranty
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out.
Designed for use only with Solo 365 equipment
Supplied in packs of 3 cartridges
Provides on-demand smoke for accurate testing and minimal wastage
Non-pressurised for safe storage and transportation
Small and lightweight, can easily be carried in pockets
Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers
Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Testifire 9002 9m Smoke/Heat Detector Testing Kit
The Testifire 9002 smoke/heat detector testing kit offers the highest available reach at 9 metres. This range allows for climb-free access to detectors on even the highest of ceilings. Removing the need for extensive scaffolding creates an enormous time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 9002 kit offers massive long term time and cost saving benefits. The kit is provided with one telescopic access pole with a reach of up to 4.5m, and three individual fibreglass extension poles to allow complete customisation of the length. This is the ultimate kit for professional alarm system engineers, and is supplied complete with a universal detector removal tool and a protective storage/carry bag at no extra cost.
Kit includes:
Testifire 1000 smoke/heat detector tester
Two battery batons
TS3 smoke capsule
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 101-001 fibreglass 1.13m extension pole (x3)
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
User friendly programmable interface with colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed – stimuli created on demand
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4″ in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole.
Allows “functional” smoke detector testing to be carried out
Durable construction and lightweight
UL listed
Universal: suitable for detectors up to 100mm/4″ in diameter
Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste
Transparent test cup enables clear view of the detector LED while testing
Suitable for use on suspended ceiling tiles
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not supplied)
Used with the Solo telescopic access poles: enables safe testing at heights