Showing all 8 results

Solo 365 Smoke Detector Tester Head & Key Components Kit

The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time. 15% lighter than the Solo 330 Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles Slimline design enables access to awkwardly positioned detectors Smaller, non-pressurised smoke cartridges for ease of storage and transport Delayed start and manual purge options for ASD and non-standard detector testing Battery, cartridge, and generator status LEDs Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Auto-LED torch for testing in dark areas Test/clear cycle status indicators located at the bottom of the head for clear line of sight Proximity sensor automatically starts test and clear cycles for quicker testing Controlled smoke delivery for less wastage and more efficient testing Automatically turns off after 10 minutes of inactivity to extend battery life Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.

Solo 365 Universal Charging Kit

The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere. Designed for use with the Solo 365 Battery Pack Works with most USB power sources and a wide range of international power supplies Supplied with transformer block to provide optimum voltage and current Simple click-on plug face design No large "power brick" required, reducing bulk and weight for transportation Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.

Solo 461 – Cordless Heat Detector Tester Kit

The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation. Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor UL and ULC listed No trailing cables - fully complies with Health and Safety at Work regulations Battery operated - supplied with two battery batons Provides rapid detector activation Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre) Visual low battery indicator Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter) Quiet fan motor for discreet operation Lightweight and easy to use Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately) Suitable for use at angles 1 year manufacturer's warranty

Solo 908 – 4m Test Kit with Solo 365

The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit. Slimline design allows easy access to awkwardly positioned detectors Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres) Automatic LED torch for testing in dark areas Compatible with standard Solo poles including the 100 and 101 Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Smaller, non-pressurised smoke cartridges for ease of storage and transport Lighter than standard Solo 330 tester with aerosols Automatically turns off after 10 minutes of inactivity to extend battery life

Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit

The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders. Allows "functional" smoke and CO alarm testing to be carried out Extension access pole enables reach of alarms at normal ceiling height Kit includes Solo 332 Large Smoke Dispenser Solo 101 Extension Access Pole Solo A10 Smoke Detector Tester (150ml) Solo C3 Carbon Monoxide Detector Tester (250ml) Ideal for use by facilities management and maintenance companies Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter Introduces the activating element without flooding the alarms Suitable for most domestic smoke and CO alarms

Testifire 1002 Smoke/Heat Detector Testing Kit

The Testifire 1002 Smoke/Heat detector testing kit offers amazing time saving benefits for those providing commercial detector testing services. With automated test initiation and bespoke, programmable test cycles, the Testifire 1002 kit offers substantial long term time and cost saving benefits. This kit also features a clearing function to remove any residual smoke or heat from the sensor quickly, reducing the time for each individual sensor test. Kit includes: Testifire 1000 smoke/heat detector tester TS3 smoke capsule Two Solo battery batons Solo 727 fast charger Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand

Testifire 6002 6m Smoke/Heat Detector Testing Kit

The Testifire 6002 smoke/heat detector testing kit offers an upgraded range of 6 metres which allows climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates an amazing time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6002 kit offers massive long term time and cost saving benefits for those carrying out "functional" testing on devices that are hard to reach by other means. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag as standard. Kit includes: Testifire 1000 smoke/heat detector tester TS3 smoke capsule Two solo battery batons Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 601-001 protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand

Testifire 9002 9m Smoke/Heat Detector Testing Kit

The Testifire 9002 smoke/heat detector testing kit offers the highest available reach at 9 metres. This range allows for climb-free access to detectors on even the highest of ceilings. Removing the need for extensive scaffolding creates an enormous time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 9002 kit offers massive long term time and cost saving benefits. The kit is provided with one telescopic access pole with a reach of up to 4.5m, and three individual fibreglass extension poles to allow complete customisation of the length. This is the ultimate kit for professional alarm system engineers, and is supplied complete with a universal detector removal tool and a protective storage/carry bag at no extra cost. Kit includes: Testifire 1000 smoke/heat detector tester Two battery batons TS3 smoke capsule Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 101-001 fibreglass 1.13m extension pole (x3) Solo 601-001 protective carrying/storage bag Automated infra-red test initiation Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing User friendly programmable interface with colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand