ECOMASTER PLUS C ESD
The cut protection glove ECOMASTER PLUS C ESD by W + R INDUSTRY is cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and carbon is certified according to EN 388: 2016 (4 X 4 3 C) and has a medium cut protection (Level C) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling dry and wet Parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the carbon fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER PLUS E ESD
The cut protection glove ECOMASTER PLUS E ESD by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and steel is certified according to EN 388: 2016 (4 X 4 2 E) and has a very high cut protection (Level E) according to EN 13997.
The ECOMASTER ® ½ immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Through The steel fibers in the knitted fabric make the glove touchscreen capable and also receive electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER PLUS F ESD
The cut protection glove ECOMASTER PLUS F ESD by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / span>
The fine glove made of micro HPPE fiber with polyamide, steel and basalt is certified according to EN 388: 2016 (4 X 4 2 F) and has a very high level of cut protection (level F) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling drier and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the steel fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER ULTIMO
The assembly glove ECOMASTER ULTIMO by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ½ immersion made of eco-polymer works very well for that Handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2003 (4 1 2 1).
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good “.
ECOMASTER ULTIMO D ESD
The ESD protective glove uh ECOMASTER ULTIMO ESD from W + R INDUSTRY has been tested in accordance with EN 13650, and thanks to its seamless 3D knitted fabric, it adapts perfectly to the Hand on and offers a very high level of comfort.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling electronic parts. The coating is liquid-repellent and yet breathable.
The assembly glove made of high-strength polyamide fiber with carbine is certified according to EN 388: 2016 (4 1 4 & nbsp ; 1 X).
The carbon fibers in the knitted fabric give the glove electrostatic properties ( ESD). These electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
ECOMASTER VELOX
The very fine assembly glove ECOMASTER VELOX by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The ½ immersion from Eco -Polymer is very suitable ut for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2016 (4 1 2 1 X).
< span class = "cs1B16EEB5">
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good “.
ECOMASTER VELOX ESD
The very fine ESD protective glove ECOMASTER VELOX ESD by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½- Eco-polymer immersion is very suitable good for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of DST 3D knitted fabric is certified according to EN 388: 2003 (4 1 2 1).
The glove has electrostatic properties (ESD) through additional carbon fibers in the knitted fabric. These electrostatic properties have been tested and confirmed by the Saxon Textile Research Institute (STFI) according to EN 16350: 2014.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
ECOTAC ACER ESD
The ESD assembly glove ACER ESD by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The ½ immersion made of high-tech micro-nitrile foam is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of polyamide is certified according to EN 388: 2016 (4th 0 3 1 X).
Additional carbon fibers in the knitted fabric give the glove electrostatic properties (ESD). These electrostatic properties have been tested and confirmed according to EN 16350: 2014.
ECOTAC GENIUS I
The assembly glove GENIUS 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½-immersion from high-tech micro- Nitrile foam is very suitable for d he handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The fine protective glove made of high-strength polyamide fiber is certified according to EN 388: 2016 (4 1 3 1 X). It is also approved for contact with food, tested according to LFGB §31.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ECOTAC HYPE
The assembly glove HYPE by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ¾-immersion made of high-tech micro-nitrile foam works very well for the handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of high-strength polyamide fiber is certified according to EN 388: 2016 (4 1 3 1 x).
ECOTAC SINUS
The cut protection glove SINUS by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made from an HPPE fiber is certified ifified according to EN 388: 2016 (3 3 4 2).
The ECOTAC® ½ -diving from a high-tech micro- Nitrile foam (Prestige Microfoam) is very suitable for handling small parts. The coating is liquid-repellent and breathable.
FALCON
The cut protection glove FALCON by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema® Diamond Technolo gy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high level of cut protection (Level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry Parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
FALCON S
The cut protection glove FALCON S by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema ® Diamond Techno logy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for wet handling and drier parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb. The glove also has a cuff made of natural cotton.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
HERKULO CUT
The cut protection glove;HERKULO CUT;from W+R INDUSTRY fits perfectly to the hand thanks to its ready-made cotton liner with cuff made of artificial leather;and offers a high wearing comfort.
The double full dipping of abrasion-resistant nitrile is well suited for handling wet or oily;parts. The coating is liquid-tight and has a very high abrasion resistance.
The;Cut protection glove made of high-quality and raw cotton also has a liner made of Kevlar in the palm®;is certified according to DIN EN 388:2016 (4 X 3 2 C) and DIN EN 407:2004 (X 2 X X X X) and has good cut protection (Level C) according to EN 13997.
K 3
The cut protection glove K3 by W + R INDUSTRY is highly cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The glove is certified according to EN 388: 2016 (4 5 4 4 ).
The palm and crook of the thumb of the K3 is made of sensitive grain leather.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
K-GRAIN
The cut protection glove K-GRAIN by W + R INDUSTRY is highly cut-resistant and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (4 5 4 4).
The palm and backhand of the K-GRAIN is made of a highly cut-resistant knitted liner with anatomical grain leather trim on the palm and backhand. The fixed cuff is made of cotton with cut protection class 2.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
K2
The cut protection glove K2 by W + R INDUSTRY is highly cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (4 X 4 4 D)
The palm and crook of the thumb of the K2 is made of split leather .
The fixed cuff is made of cotton with cut protection class 2.
The glove was tested by Dermatest® for its skin tolerance and received the grade " very good “.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
KROK 1
The work glove KROK 1 by W + R INDUSTRY in Canadian style offers good wearing comfort thanks to its cut that is adapted to the hand.
The palm and the knuckle protection are made of grain leather, the backhand is made of Beef split led he. The cuff is made of grain leather and also has a pulse protection.
The glove is certified according to EN 388: 2003 (3 1 4 2).
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
LEPUS
The work glove LEPUS by W + R INDUSTRY in mechanic style offers good wearing comfort thanks to its hand-adapted cut.
The palm and the knuckle protection are made of goat nappa leather, the backhand is made of Bi -elastic em fabric. The end consists of a highly elastic band with Velcro fastener.
The glove is certified according to EN 388: 2003 (2 1 2 2).
Maximum
The assembly glove MAXIMUM by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ECOGRIP® ½-immersion made of PU with Nitrile works very well for the Ha ndling wet and dry parts. The coating is liquid-repellent and yet breathable.
The fine protective glove made of nylon / elastane is certified according to EN 388: 2016 (4 1 2 1 X).
The glove was tested by Dermatest® for its skin tolerance and received the grade "very good “.
