Coating: PURE latex.
Construction / Civil Engineering
Second Work / Craftman
Services / Logistics
PURE latex coating
Manufactured under conditions which respect the environment
Minimises the risk of skin irritation
Good grip of handled objects
Very good adhesion in wet or dry environments
Available only with header card
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
|5||Dexterity (from 1 to 5)|
• Conform to harmlessness (pH, chrome VI levels, etc…).
• Conform to the size charts (see chart on below).
• Pass the dexterity test.
• Conform to the labelling, information and identification instructions.
Each protective glove is clearly identified by a standardized label containing the following elements:
– Our brand logo.
– The product reference or the trade name.
– The size.
– An information tag indicating that instructions on the product are available.
– The standardization pictogram(s) with their performance ratings.
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
|2||Resistance to abrasion (from 1 to 4)|
|1||Resistance to cutting (from 1 to 5)|
|4||Resistance to tear (from 1 to 4)|
|1||Resistance to puncture (1 to 4)|
|A||Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)|
Impact resistance on the metacarpal area: if this performance is claimed, the “P” mark appears.
Cut by blade, 2 test methods:
EN388 6.2.: For low to middle risks of cutting. A circular blade on which a constant force of 5 N is applied, moves back and forth until the sample is cut. It measures the number of completed cycles and is credited with the corresponding level.
EN ISO 13997: For materials that blunt the blade during the EN388 6.2 test and/ or are particularly resistant, for high risk of cutting. A straight blade makes a single movement of 20 mm with a force of 2N, the test is repeated with a different force as many times as necessary until the sample is cut. A level corresponding to the force required to cut the sample is assigned. This method better represents the usage
situations that present a high risk of cutting.
EN407:2004 Protective gloves against Heat & Fire risks (X = Unrealized test)
|X||Resistance to flammability (from 1 to 4)|
|2||Contact heat resistance (from 1 to 4)|
|X||Convective heat resistance (1 to 4)|
|X||Radiant heat resistance (from 1 to 4)|
|X||Small splashes of molten metal (from 1 to 4)|
|X||Large quantities of molten metal (from 1 to 4)|
It applies to all gloves which must protect hands from heat and/or flames in any one or several of the following forms: fire, contact heat, convective heat, radiating heat, small spray of molten metal or large spray of melting metal.