Agriculture / Green Areas
Construction / Civil Engineering
One-D Rotor ergonomic clamping system
One-handed adjustment with or without gloves
2 positions of the high and low head circumference
Suitable for all body shapes
|QUARUP4BC–QUARTZ UP IV||3295249175443||40||White||Adjustable|
|QUARUP4BL–QUARTZ UP IV||3295249175450||40||Blue||Adjustable|
|QUARUP4JA–QUARTZ UP IV||3295249175467||40||Yellow||Adjustable|
|QUARUP4OR–QUARTZ UP IV||3295249175481||40||Orange||Adjustable|
|QUARUP4RO–QUARTZ UP IV||3295249175498||40||Red||Adjustable|
|QUARUP4VE–QUARTZ UP IV||3295249175504||40||Green||Adjustable|
REGULATION (EU) 2016/425
EN397:2012 + A1:2012 Protective helmets for industry
|MM||Molten metal spray|
|-30°C +50°C||Use : Very low temperature – -30°C / +50°C|
– Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J.
– Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
– Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C.
Protects against lateral compression.
The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC.
Resistance to molten metal splashes