Ideal for all types of compressed air dryers with different measuring ranges such as -80…+20°Ctd; -60…+30°Ctd; -20…+50°Ctd Sensor element insensitive against condensation and water Maximum pressure 500 bar (special version) Long-term stable and drift-proof, thus optimized calibration intervals Gas-independent measurement, also suitable for other non-corrosive gases Fast response time, especially in case of moisture ingress BSP- or NPT-Threads Protection class IP 65 Analog output 4…20 mA and Modbus RTU (RS 485) interface, contact relay with limit value adjustable via keys (max. 60 VDC, 0.5A) Optional: Modbus TCP (Ethernet), Modbus TCP PoE (Ethernet) or M-Bus interface Measured values available in different units, pressure dew point [°Ctd], temperature [°C], rel. humidity [%rh], abs. humidity [g/m³], moisture content [g/kg], moisture content V/V [ppmV/V], water vapor partial pressure [hPa], atmospheric dew point [°Ctd.atm] On-site sensor diagnostics with handheld device or CS Service Software
FA 500 – Dew point sensor with integrated display and alarm relay
| Brand |
CS Instruments |
|---|
Related products
DP 400 mobile – Mobile Dew Point Measurement with Pressure Sensor
For measurement of all humidity parameters under pressure up to 16 bar. The portable dew point meter with integrated, rechargeable battery has been developed especially for the eld use. Besides a highly precise dew point sensor the device also contains a precise pressure sensor up to 16 bar. So in addition to the dew point in °Ctd, the temperature in °C and the line pressure in bar also further moisture parameters (% RH, mg/m3, g/m3) as well as pressure-dependent measuring values (g/kg, ppm v/v, atm. dew point °C) can be calculated.
LeakCam 600 – all relevant leakages at a glance
The LeakCam 600 precisely detects compressed air leaks and leaks in compressed gases - even in noisy industrial production environments. Equipped with 64 ultrasonic MEMS microphones and the Power Beam Forming algorithm, it visualises multiple leakages simultaneously and enables them to be located quickly from a great distance. This saves you time when searching for leaks, reduces energy costs and increases the efficiency of maintenance.
CMM 500 – High-precision measuring of the capacity of compressors
The CMM 500 Compressor Master Meter is a new type of reference flow measuring device that has been specially developed for high-precision measuring of the capacity of compressors and for billing compressed air. The CMM 500 can be used both directly downstream of the compressor for measuring wet compressed air and as a compressed air meter for consumption measurement and billing of dry compressed air. The large measuring span of 1:130 and an accuracy of <0.5 % of the measured value (0.2 Qmax to Qmax) are unique. Service or maintenance can be carried out at any time via the mounting plate (zero point correction, condensate drain, sensor replacement for calibration), even during operation under pressure.
VA 570 – Thermal mass flow meter for consumption measurement
Record and reduce your energy costs and increase your Sustainability with the VA 570 flow meter. Monitor your Consumption and analyse your leakage rate with a permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual Consumers.
