NITRIL TECHNO 1
The assembly glove NITRIL TECHNO 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its made-up cotton liner (roughened inside) and is extremely comfortable to wear.
The ¾ immersion made of abrasion-resistant Nitrile is suitable good for handling dry parts. The coating is liquid-tight and has a very high abrasion resistance.
The assembly protective glove made of a high quality and raw cotton is certified according to EN 388: 2003 (4 1 2 1).
ROAD POLAR
The cold protection glove ROAD POLAR from W + R INDUSTRY ensures pleasant work in cool temperatures.
The warming work glove made from cow grain leather is in accordance with EN 388: 2016 (3 1 4 4 ) certified.
The palm is made of cow grain leather, the backhand is made of a signal fabric (neon orange). The warming lining is made of soft cotton.
STIER 1
The work glove STIER I from W + R INDUSTRY in Canadian style | offers good wearing comfort thanks to its cut that is adapted to the hand.
The palm and the knuckle protection are made of cow grain leather, the backhand is made of natural cotton twill. The lining on the palm is made of heavy cotton. The canvas cuff with double stitching also has a pulse protection.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
Stickstoffhandschuh N2
The liquid-repellent outer material reliably protects against splashes and vapours of liquefied (cryogenic) gases, such as .B nitrogen, which can reach a temperature of up to - 196 °C (approx. 77 K) in a liquid state.
Through a multi-layer heat-insulating lining, the temperature in the glove does not fall below 15 °C on contact with liquid nitrogen (-160 °C) tested and confirmed by the Max Planck Institute for Solid State Research, Stuttgart).
THERMO WELDER 2
The welding glove THERMO WELDER 2 from W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4 1 3 X 4 X) and can according to DIN EN 12477: 2005 for r heavy welding work (type A) is used. It is also certified according to EN 388: 2003 (4 2 4 4).
The palm of the THERMO WELDER 2 is made of red split cow leather, the backhand made of red split cow leather. The lining is made of high quality cotton. The long cuff is made of split leather and is only attached on the inside.
TIGER LONG
The cut protection glove TIGER LONG by W + R INDUSTRY is highly cut-resistant and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (4 5 4 3).
The palm and backhand of the TIGER LONG is made of red split leather. The lining is made of a high-cut resistant textile. The long cuff is made of split leather and also has a pulse protection.
WELDER 11
The welding glove WELDER 11 from W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 407: 2004 (4 1 3 X 4 X) and can according to DIN EN 12477: 2005 with TIG welding and can also be used for heavy welding work (type A + B). It is also certified according to EN 388: 2003 (3 1 4 3).
The palm of the WELDER 11 is made of beige grain leather, the backhand is made of beige grain leather. The long cuff is made of split leather.
< span class = "cs1B16EEB5">
WELDER 2
The welding glove WELDER 2 from W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 407: 2004 (4 1 2 X 4 X) and can according to DIN EN 12477: 2005 for TIG welding and can also be used for heavy welding work (type A + B). It is also certified according to EN 388: 2003 (3 1 4 3).
The palm of the WELDER 2 is made of cow grain leather, the backhand is made of split leather. The long cuff is made of split leather.
< span class = "cs1B16EEB5">
WELDER LIGHT 1
The welding glove WELDER LIGHT 1 by W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4 1 2 X 4 X ) and can according to DIN EN 12477: 2005 for TIG Welding and also for heavy welding work (type A + B). It is also certified according to EN 388: 2003 (2 1 2 3).
The palm of the WELDER LIGHT 1 is made of fine sheep nappa leather, the backhand is made of fine sheep nappa leather. The long cuff is made of split leather
WELDER LIGHT 2
The welding glove WELDER LIGHT 2 from W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4 1 3 X 4 X ) and can according to DIN EN 12477: 2005 for TIG Welding and also for heavy welding work (type A + B). It is also certified according to EN 388: 2003 (3 1 4 3).
The palm of the WELDER LIGHT 2 is made of fine grain leather, the backhand is made of fine grain leather. The long cuff is made of split leather.
< span class = "cs1B16EEB5">
WELDER LIGHT 7
The welding glove WELDER LIGHT 7 from W + R INDUSTRY offers perfect wearing comfort thanks to its anatomical layered cut.
The glove is certified according to EN 407: 2004 (4 1 2 X 4 X) and can according to DIN EN 12477: 2005 for TIG Welding and also for heavy welding work (type A + B). It is also certified according to EN 388: 2002 (2 1 2 3).
The palm is made of fine sheep nappa leather, the backhand is made of fine sheep nappa leather.
The long cuff is made of split leather.
WELDER TX
The welding glove WELDER TX by W + R INDUSTRY offers good wearing comfort thanks to its hand-adapted cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 407: 2004 (4 2 3 X 4 X) and can according to DIN EN 12477: 2005 for severe Sc welding work (type A) can be used. It is also certified according to EN 388: 2003 (2 2 2 2).
The palm of the WELDER TX is made of special textile fibers, the backhand of special textile fibers. The lining is made of a heat protection material. The long cuff is made of special textile fibers.