ECOTAC GENIUS I
The assembly glove GENIUS 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½-immersion from high-tech micro- Nitrile foam is very suitable for d he handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The fine protective glove made of high-strength polyamide fiber is certified according to EN 388: 2016 (4 1 3 1 X). It is also approved for contact with food, tested according to LFGB §31.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ECOTAC HYPE
The assembly glove HYPE by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ¾-immersion made of high-tech micro-nitrile foam works very well for the handling of wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of high-strength polyamide fiber is certified according to EN 388: 2016 (4 1 3 1 x).
ECOTAC SINUS
The cut protection glove SINUS by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made from an HPPE fiber is certified ifified according to EN 388: 2016 (3 3 4 2).
The ECOTAC® ½ -diving from a high-tech micro- Nitrile foam (Prestige Microfoam) is very suitable for handling small parts. The coating is liquid-repellent and breathable.
FALCON
The cut protection glove FALCON by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema® Diamond Technolo gy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high level of cut protection (Level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry Parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
FALCON S
The cut protection glove FALCON S by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema ® Diamond Techno logy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for wet handling and drier parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb. The glove also has a cuff made of natural cotton.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
HERKULO CUT
The cut protection glove;HERKULO CUT;from W+R INDUSTRY fits perfectly to the hand thanks to its ready-made cotton liner with cuff made of artificial leather;and offers a high wearing comfort.
The double full dipping of abrasion-resistant nitrile is well suited for handling wet or oily;parts. The coating is liquid-tight and has a very high abrasion resistance.
The;Cut protection glove made of high-quality and raw cotton also has a liner made of Kevlar in the palm®;is certified according to DIN EN 388:2016 (4 X 3 2 C) and DIN EN 407:2004 (X 2 X X X X) and has good cut protection (Level C) according to EN 13997.
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
BLUETEC DYNAFORCE F
The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
BLUETEC GREEN POWER S
The cut protection glove GREEN POWER + TWILLSTULPE by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. span>
The fine one Glove made of e A Tekora® high-tech fiber with a poly / glass core is certified according to EN 388: 2016 (4 5 4 2). The ½ immersion made of polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids. The glove also has a cotton cuff.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
BLUETEC GREEN POWER+
The cut protection glove GREEN POWER + by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove from one Tekora® Hight echfaser with poly / glass core is certified according to EN 388: 2016 (4 5 4 2). The ½ immersion made of polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids.
< span class = "cs1B16EEB5"> The glove was tested by Dermatest® for its skin tolerance and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
BLUETEC LEVIS
The assembly glove LEVIS 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½ immersion made of polyurethane (matt black ) is very suitable for that Handling of wet and dry parts. The coating is breathable, oil-resistant and offers a high level of impermeability to liquids on the palm.
p >
The very fine protective glove made of polyamide fiber is certified according to EN 388: 2016 (3 1 2 1 X).
< p class = "cs95E872D0">